02-17-2019, 10:07 AM | #1 |
Registered User
Join Date: Feb 2012
Location: Vinton, Va.
Posts: 493
|
Clutch fork problem
Working on a GM ( Pontiac) V8 with muncie 4 speed. I know its not my truck but same/similar parts. Tranny wouldn't shift at all. Found adjustment rod for clutch had poked a hole right through the end of round "pocket" on end of clutch fork ! Went through 1/2" or so, so it was way out of adjustment, to say the least. I CAN'T SEEM TO REMOVE FORK FROM BELLHOUSING. I've got it off the pivot ball pretty good but then can't remove fork. Any tips/suggestions before i have to remove tranny? I might/should anyway to see what's going on. Might be bad throwout bearing or other end of fork could be messed up. Any thoughts greatly appreciated.
__________________
"You are not forgotten" USMC 75-79 (Aviation Ordnance Tech- F-4 Phantom) 1959 H-D Panhead. Owned since 1978. Currently with son in Lawton, OK. 1968 Chevy Custom SWB pick up. Fleetside. Lowered 4/6. Totally refurbished. 1966 Pontiac GTO. 4 speed. Saved original 389. Now has slightly built 455 engine. 355 rear gears. Very fun to drive ! |
Bookmarks |
|
|