Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
02-28-2019, 07:25 PM | #1 |
Registered User
Join Date: Feb 2019
Location: Troy NH
Posts: 91
|
1986 Chevy K30 CUCV/M1008 rebuild
Hi all, figured I'd share my build, get information and tips too.
Truck base is a 1986 M1008, picked it up as a frame and cab, motor and transmission. No axles or bed. I found a set of dually axles, from a cab and Chassis truck, 4.10 gears. I had a 292 inline 6 I've been wanting to use, and also found an early NV4500 with the 6.34 first gear to use. Biggest issue so far has been the passenger side motor mount of the 292, it's offset, and lots of conflicting information, even from GM. Still trying to narrow down the correct mount, although I may need to fabricate something temporariy until I do find the correct mount. Having a little trouble uploading pictures, will try again shortly. |
Bookmarks |
|
|