![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: May 2018
Location: Prattville, AL
Posts: 611
|
what engine block do I have
Ok, I am currently going in circles trying to figure out what engine block I have in the '67 truck I bought. I have been doing research but keep coming to dead ends. I went back and tripled checked the numbers to make sure I had them right and looked some more and no luck.
Here is what I do know: -Cast on each side of the block is CFD 207 -Under the alternator is V0430FSD, (“V”=Flint, “0430”= April 30, “FSD”= ?? not on any list) and stamped below it is CF/203864. -Left side on the bell housing is 140 0207 (There is a blank between the zero's) -Back of the block on the right side is 109 The cylinder heads are 3782461 which I have found were used 302/327/350 blocks. The motor runs good and I really don't want to open it up to get bore and stroke info. Any help would be appreciated thanks. ![]() |
![]() |
![]() |
Bookmarks |
|
|