Brake set up

[tinydb84]

Hello all,

I am trying to piece together my brake system. My hotside is really close to my stock brake booster and I switched to rear disc brakes with a Ford 9''. I did some research and wanted some one to look over my parts list before I pull the trigger.

Here is my current issue. My booster is 11 inches in diameter and is about an 1/8'' away from the manifold.

I am thinking of this dual 8 inch booster.

With the rear disc added most things I found said to go with a 77-82 Corvette master cylinder and a disc/disc proportioning valve.


Let me know if I am headed down the wrong path or if I should be getting something else. This is a budget build so I don't want to go with anything too fancy. Thanks for your time.