Clutch disk size - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JeffMo1 · 05-05-2019, 10:38 PM

My throw out bearing on my 70 C-10 has just started to do some intermittent squealing so I would like to buy a new clutch kit and have it ready for install when I pull the current one out.

The engine is a 350 ( out of 80-82 Camaro ) with a Saginaw 456 torque tube tail shaft 4-speed. I know that the input shaft is 1-1/8, 10 spline. All I need now is to find out what the disc size is. Any tips on how to find out w/o pulling it apart?

From what I've researched in the forums so far, I won't know until it's out.

I'm hoping to minimize the downtime because I really like driving it.

Jeff

05-05-2019, 10:38 PM	#1
JeffMo1 Registered User Join Date: Apr 2018 Location: Seattle, WA Posts: 4	Clutch disk size My throw out bearing on my 70 C-10 has just started to do some intermittent squealing so I would like to buy a new clutch kit and have it ready for install when I pull the current one out. The engine is a 350 ( out of 80-82 Camaro ) with a Saginaw 456 torque tube tail shaft 4-speed. I know that the input shaft is 1-1/8, 10 spline. All I need now is to find out what the disc size is. Any tips on how to find out w/o pulling it apart? From what I've researched in the forums so far, I won't know until it's out. I'm hoping to minimize the downtime because I really like driving it. Jeff



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.