GMC. Truck owners - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mygmctruck1 · 07-03-2019, 03:29 PM

My 68 K1500 had a V-6 in it . I replaced it with a 350 V-8 .

I did not realize , there are a different set of motor cross member hole’s for the V-8 ? I never thought about the difference the location would make.
Because I used the back holes instead on the front holes . I am 3 1/4 “ to far back and dizzy hits firewall.
I sure I am correct in my assumption but would like to verify my opinion with some one who owns a 68 K1500 . With an 8 rather than a V-6 .

Here’s a pic if that helps.

07-03-2019, 03:29 PM	#1
mygmctruck1 Registered User Join Date: Jun 2018 Location: Munising,Mi Posts: 360	GMC. Truck owners My 68 K1500 had a V-6 in it . I replaced it with a 350 V-8 . I did not realize , there are a different set of motor cross member hole’s for the V-8 ? I never thought about the difference the location would make. Because I used the back holes instead on the front holes . I am 3 1/4 “ to far back and dizzy hits firewall. I sure I am correct in my assumption but would like to verify my opinion with some one who owns a 68 K1500 . With an 8 rather than a V-6 . Here’s a pic if that helps. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.