Power steering box ID/problem - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**AussieinNC** · 07-23-2019, 12:55 PM

The return port is an O ring style....make sure your return pipe fitting has a rubber O ring on the outside of the pipe piece that fits into the hole....

The O rings are metric but most auto stores have them in stock....

or of you have the flare type return hose you can order a flare insert from Speedway Motors...910-32921....

The flare fitting goes into the steering box flare side up, then you screw the hose on....

If your system is groaning with hydroboost installed, your pump is not providing sufficient flow...maybe time for a rebuild or new one....

07-23-2019, 12:55 PM	#2
AussieinNC Moderator Join Date: Jun 2017 Location: Cherryville, NC Posts: 2,204	Re: Power steering box ID/problem The return port is an O ring style....make sure your return pipe fitting has a rubber O ring on the outside of the pipe piece that fits into the hole.... The O rings are metric but most auto stores have them in stock.... or of you have the flare type return hose you can order a flare insert from Speedway Motors...910-32921.... The flare fitting goes into the steering box flare side up, then you screw the hose on.... If your system is groaning with hydroboost installed, your pump is not providing sufficient flow...maybe time for a rebuild or new one.... __________________ Family and country before all others... 2006 Chevy Silverado (Daily Driver) 2012 Chevy Equinox Last edited by AussieinNC; 07-23-2019 at 01:12 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.