Another Neutral Safety Switch Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Pontitruck · 08-14-2019, 10:04 PM

Hi guys and gals,

I am in the middle of adding a 2005 5.3 and 4L60e to my 65 GMC Fleetside SWB. I am using the BP harness and Mounting the PCM in the cab. This truck had zero wiring in it as I bought it as a stalled project.
I purchased a universal steering column that does not have a neutral safety switch provision. I was reading here about just using the factory NSS on the trans for both NSS and reverse lights.

Can anyone verify that I can do this so I do not need to buy another steering column? I have modified the one I have and they will not take it back. Can you post pics, pin outs etc if this is possible please?

Thanks all!

08-14-2019, 10:04 PM	#1
Pontitruck Registered User Join Date: Sep 2018 Location: South of the Indy 500 Posts: 116	Another Neutral Safety Switch Question Hi guys and gals, I am in the middle of adding a 2005 5.3 and 4L60e to my 65 GMC Fleetside SWB. I am using the BP harness and Mounting the PCM in the cab. This truck had zero wiring in it as I bought it as a stalled project. I purchased a universal steering column that does not have a neutral safety switch provision. I was reading here about just using the factory NSS on the trans for both NSS and reverse lights. Can anyone verify that I can do this so I do not need to buy another steering column? I have modified the one I have and they will not take it back. Can you post pics, pin outs etc if this is possible please? Thanks all!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.