47-55.1 Factory screw up on inner door latch handles. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MARTINSR · 09-21-2019, 11:11 AM

Anyone have any idea why GM did this goofy thing with the inner door handle? They have a recessed area in the door for the "rod" going from the handle to the latch but then have the rod going down at an angle not using the recessed area! I actually pulled the latch handles apart and made them correct on my trucks doors I had years ago. I will have to do the same again, kinda OCDish I guess.

Sorry if this has been discussed to nausium, I don't remember seeing anything here about it.

Brian

09-21-2019, 11:11 AM	#1
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,003	Factory screw up on inner door latch handles. Anyone have any idea why GM did this goofy thing with the inner door handle? They have a recessed area in the door for the "rod" going from the handle to the latch but then have the rod going down at an angle not using the recessed area! I actually pulled the latch handles apart and made them correct on my trucks doors I had years ago. I will have to do the same again, kinda OCDish I guess. Sorry if this has been discussed to nausium, I don't remember seeing anything here about it. Brian Attached Images __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.