Steering Box Replacement - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Starwood · 10-23-2019, 09:12 PM

I tried tightening the gear box (the 1/2" turn trick) and there was still too much play, so I went ahead and got a replacement.

Just checking in with you guys for any do's/don'ts before things get dirty. There is not much on YouTube for the old Chevys.

I can take it to the trusty classics shop for labor only, but hoping I can pull this off and save a few bones.

If you've swapped one of these and have a minute to share the good, bad, and ugly - I'd appreciate your comments.

10-23-2019, 09:12 PM	#1
Starwood Registered User Join Date: Mar 2019 Location: SAN RAMON Posts: 73	Steering Box Replacement I tried tightening the gear box (the 1/2" turn trick) and there was still too much play, so I went ahead and got a replacement. Just checking in with you guys for any do's/don'ts before things get dirty. There is not much on YouTube for the old Chevys. I can take it to the trusty classics shop for labor only, but hoping I can pull this off and save a few bones. If you've swapped one of these and have a minute to share the good, bad, and ugly - I'd appreciate your comments. __________________ 64 C10 Custom 70 C10 Stepside w/67 Front End Clip 1970 Buick Ragtop 2003 Anniversary Road King Classic



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.