Ive been restoring my 66 for a while and I am at the brakes. The disc conversion was done by a shop in 2005 and it turned out great, plenty of stopping power and all. In 2015 I started the tear down and took pics along the way. I cleaned up the calipers and painted them and stored them. The rotors had been turned not long before I tore things down in 2015 so I left that alone and stored it. I stored the components also and Im pretty sure I should just replace the lines and all so I could use some help identifying what I have so I can order the right parts. I used rock auto 1972 c10 3.0L specs to select the pads, hope I got that part right. They look the same, I think I need to reuse the 2 clips on the old ones. Ive watched this video assuming its pretty similar to what Ill need to do.
https://www.youtube.com/watch?v=sDIQHtgCASA
Ill attach some pics and hopefully its enough to go by for any help you can offer.
Here is a pic of the components I took out of storage. Looks like I am missing a banjo bolt but I should probably order new ones anyway.
11-01-2019, 06:31 PM
Threaded Mode