Quick HEI wiring question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bushman66 · 12-13-2019, 11:03 AM

This is in a 1966 C10 that originally had a 292 I6 in it, now has a crate 350, but the same bellhousing and (3 bolt) starter from the 292.

Picked up a brand new AC Delco HEI distributor (P/N 93440806). It's in and I have a 12 gauge wire running directly to the IGN unfused terminal on the fuse panel (verified it gets 12.6V when the key is in "RUN" position, 0V when "OFF"). I have the lead from the engine harness that went to the positive side of the coil taped up.

Do I need to make any changes on the 2 wires on the engine harness that run to the solenoid? (i.e. do I need to remove anything, or can I just leave them as they are before I start it up?) I don't want to fry anything...

Thanks!

12-13-2019, 11:03 AM	#1
Bushman66 Registered User Join Date: Apr 2019 Location: Phx, Arizona Posts: 131	Quick HEI wiring question This is in a 1966 C10 that originally had a 292 I6 in it, now has a crate 350, but the same bellhousing and (3 bolt) starter from the 292. Picked up a brand new AC Delco HEI distributor (P/N 93440806). It's in and I have a 12 gauge wire running directly to the IGN unfused terminal on the fuse panel (verified it gets 12.6V when the key is in "RUN" position, 0V when "OFF"). I have the lead from the engine harness that went to the positive side of the coil taped up. Do I need to make any changes on the 2 wires on the engine harness that run to the solenoid? (i.e. do I need to remove anything, or can I just leave them as they are before I start it up?) I don't want to fry anything... Thanks!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.