Passager side window won't roll down

[cebra]

"If you have to overhaul the door, once done you'll see how easy." I think replacing the window regulator is the single most difficult task on these trucks followed by replacing the stock heater core (I am VA now so easy peasy on the heater core now). I personally would much rather replace head gaskets or a clutch than replace the regulator (especially now that my truck is painted). I fought with my regulator/vent window for most of a day until I realized the hole for the roller was too small and needed bent open for the repro regulator. I believe the only bolts that I have not touched on my truck are crossmember/steering gear so I am speaking subsequent to a full rebuild. The thought of replacing a regulator on my painted truck makes me sick at my stomach.