help me wire THIS.

[ocbaud]

Primary Harness (h1) 12pin connector:
orange-(-)500 mA armed output
white- (+)/(-) parking light flash output
white blue- activation (no need!)
black/white- (-)200 mA dome light output
green- (-) door trigger input zone3
blue- multiplexed input/ trunk (-)
violet- (+) door trigger input zone3
black- ground
brown- siren(+)
red- (+) 12v constant power
red/white-(-)200mA channel 2 validity output


H2-6pin
blue- (-)status/factory rearm
blue/black- (-)third ignition output
gray- (-)hoodpin switch
brown- (+)brake switch shutdown
violet/white- tach input
black/white (-)neutral safety

white-2 pin
status led port

blue 2-pin
valet switch port

black 3 pin
programming port

white 3 pin door lock outputs
blue
(-)unlock
(+)lock

white
(+)unlock
(-)lock


white 4 pin
shock sensor input

white 3 pin aux harness
purple/black (-)channel 4 output
green/black (-)factory disarm
gray black (-)wait-to-start


hahaha, its gonna be a pain, isnt it.