700r4 wiring with an LQ4 6.0 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

suburban99 · 04-05-2020, 01:43 PM

Hey all, swapping out the TH350 in my 72K10 for a 700R4 that has been rebuilt. Main reason is to get the engine 2" forward without changing transfer case position or driveshaft lengths, and the overdrive. I already have this tranny, know it's not the best for this application but it's been built heavy duty..
So my question is can I use the stock ECM to generate the lockup for the torque convertor? 700R4 has 3 wire plug. I modified my own harness if that matters..Thanks

04-05-2020, 01:43 PM	#1
suburban99 Registered User Join Date: May 2014 Location: Mission BC Posts: 452	700r4 wiring with an LQ4 6.0 Hey all, swapping out the TH350 in my 72K10 for a 700R4 that has been rebuilt. Main reason is to get the engine 2" forward without changing transfer case position or driveshaft lengths, and the overdrive. I already have this tranny, know it's not the best for this application but it's been built heavy duty.. So my question is can I use the stock ECM to generate the lockup for the torque convertor? 700R4 has 3 wire plug. I modified my own harness if that matters..Thanks __________________ 1962 C10 Longbox LS 5.3 4L60E----Sold$$ 2014 Ram 4x4 3500 Laramie Diesel..Momma's truck 2015 Ram 4x4 1500 1997 Boxster. 1972 K10 Custom Deluxe LS 6.0 1950 GMC 3100 S10 & LS swapped



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.