47-55.1 Rear brake line and exhaust

[NeoJuice]

I'm preparing for inspection and I was reading through the inspection manual and I found one item that I probably might fail.

See the attached image highlighted in red.

Now if you see my rear brake line running to my rear passenger side tire runs along the upper shock mount brace. When the exhaust shop did the exhaust I noticed it was a little close but now realizing it might fail. Can I get away with a heat shield product around that 1-2 foot section so I dont have to re-do the brake line. There are many different kinds on the market from foil wraps with steel locking ties to metal shields and sleeves. At this time I'm not sure if I would wrap the exhaust pipe or wrap the upper shock tower brace.

Example: https://www.heatshieldproducts.com/heatshield-armor

Thoughts? It took me a long time to get all my brake issues resolved and would hate to have to re-do the line.