The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 07-23-2020, 07:49 AM   #1
Jemezcrusher
Registered User
 
Join Date: Nov 2015
Location: Jemez Springs, NM
Posts: 435
Window regulator

Doing final touches on my 1950 3100 and am having issues with a window regulator. Over the last couple of years and have done some wheeling and dealing on parts. I picked up a new pair of regulators from a guy (don’t know the manufacturer) but both failed in the install process. They broke internally as soon as I put any real pressure on them rolling up.

I put my old regulators back in and the passenger seems fine, but the drivers side has an issues. It seems to droop forward and the leading edge leaves a gap at the top curve, and the window is not horizontal in the opening, but tilted a bit.

I am not sure if this is an adjustment issue or a worn out regulator. I see you can rotate the pivot a tad but this seems to have little effect.

Looking for suggestions on a good regulator supplier or advice on how to get this worked out
Jemezcrusher is offline   Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:15 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com