Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
03-28-2021, 11:15 AM | #1 |
Registered User
Join Date: Sep 2014
Location: Albuquerque NM
Posts: 98
|
engine swap cooling question
1965 c10 inline 6
Hello, Working on my 65 c10. I found an engine from a 77 c10...another inline 6 but a 250 with power steering pump and a hei….instead of the 230. It bolted right in and hooking up the wiring for the hei and hoses I did a test fire and it runs beautifully. The 250 didn't come with the fan. I had my fan from the 230 but the bolt pattern is different. Looking at the 77 250 online it looked like it came with a fan clutch....got the clutch and fan from orileys but it doesn't fit..the clutch hits the radiator. The 66 didn't have a clutch....so what is the work around for this? I bought another fan that bolts right on but without the clutch it hits the engine..will just a spacer work? Im sure this has a simple answer just stumped me on the correct way to go. thanks any other issues you guys can forsee with the 250? Trans is 3 on tree and Im keeping it that way Thanks |
Bookmarks |
|
|