Questions about using adjustable proprtioning valve. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

johnymac · 06-10-2002, 11:33 AM

I have just converted my truck to power disc brakes. 1967 C10.
I have replaced the old proportioning value with a Wilwood adjustable one.

I am curious, took a wire off the old proportioning valve. Thinking this must be a low pressure valve. Not sure if I should try and buy some kind of a replacement. Figured I had better ask before I finish with the brake lines.

Has anyone replaced stock prop valve for and adjustable and found a solution for this ?

Any suggestions ?

Thanks much!!

06-10-2002, 11:33 AM	#1
johnymac Registered User Join Date: Mar 2001 Location: Dover, NH USA Posts: 194	Questions about using adjustable proprtioning valve. I have just converted my truck to power disc brakes. 1967 C10. I have replaced the old proportioning value with a Wilwood adjustable one. I am curious, took a wire off the old proportioning valve. Thinking this must be a low pressure valve. Not sure if I should try and buy some kind of a replacement. Figured I had better ask before I finish with the brake lines. Has anyone replaced stock prop valve for and adjustable and found a solution for this ? Any suggestions ? Thanks much!! Last edited by johnymac; 06-10-2002 at 09:50 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.