Can 75-87 C20 lower control arms be used in my 67 C10 if I change the ball joint?

[wesmigletz]

My left front lower control arm has a dent with a slight bow; the truck drove fine, but I'm not sure if it should be reused. I will be adding 71-72 disc brakes, and would be changing the ball joint and control arm shaft.

I found dorman and delco lower control arms available on-line. Can these be used on my 67 C10 1/2 ton if I change the ball joint? Will the 67 ball joint press into the c20 arm? Will I need to change the U bolts that mount the control arm?



https://www.summitracing.com/parts/MOG-RK620036

https://www.summitracing.com/parts/r...CABEgIPbvD_BwE