47-55.1 Steering linkage, R & P question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

51 3600 · 09-13-2021, 07:10 PM

I have what I'm told is a Camaro rack and pinion on my truck, maybe 2000 vintage, not sure. I cannot find a steering universal to mount to it. The shaft measures 5/8", is smooth, no splines, shaped something like a DD but the flats are not equal, and it has a notch for a clamp type connecter. I can find splined 5/8" universals and 3/4" smooth universals but can't find 5/8" smooth. Need 3/4" DD on the other end.

Did this originally have a rag joint attached to the shaft? If so I can't use that as I don't have space to accommodate one now. Any suggestions?

Name: R & P 001.jpg
Views: 268
Size: 107.9 KB

Name: R & P 001.jpg
Views: 268
Size: 107.9 KB

Name: R & P 003.jpg
Views: 284
Size: 105.4 KB

09-13-2021, 07:10 PM	#1
51 3600 Registered User Join Date: May 2016 Location: Orange Park, FL Posts: 191	Steering linkage, R & P question I have what I'm told is a Camaro rack and pinion on my truck, maybe 2000 vintage, not sure. I cannot find a steering universal to mount to it. The shaft measures 5/8", is smooth, no splines, shaped something like a DD but the flats are not equal, and it has a notch for a clamp type connecter. I can find splined 5/8" universals and 3/4" smooth universals but can't find 5/8" smooth. Need 3/4" DD on the other end. Did this originally have a rag joint attached to the shaft? If so I can't use that as I don't have space to accommodate one now. Any suggestions? __________________ Al '51 3600, LS5.3, 4L60e, Danforth cross., Blazer front susp., Borg Warner 9 bolt 3.27 GR, Wrangler leafs



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.