|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
09-23-2021, 11:19 PM
|
#1 |
|
Registered User
Join Date: Feb 2013
Location: fayetteville,r
Posts: 24
|
vacuum advance replacement
I need to replace the vacuum advance on my 68 c10 305. Two screws hold it in place. The back screw is easily removed but the front one is partly covered by the plate under the points. Is there anyway to remove that screw without removing the distributor? With the screws removed it looks like the pin that connects to advance the dist. could be slipped out.
|
|
|
| Bookmarks |
|
|
Threaded Mode