|
06-11-2002, 09:39 AM
|
#1 |
|
Registered User
Join Date: Apr 2000
Location: Freeland,Michigan,USA
Posts: 312
|
Rear end problems
I had the rear end out last month,put in new trailer arms, saddles,coils and cups. It all went fine,drove better than ever. Then, yesterday, I get a growling from the rear end, only when I am going forward, about 30 mph or so. When I did all that work some fluid leaked out of the rear end, but I checked the level, it seemes fine. I never had the rear end apart, just off the chassis to get the saddles welded on. I jacked up one side,and the wheel was fine going backward, but noisy and tough to turn forward.My qusetion(s) is (are)
1. Is there some alignment I should have done when I put the rear end back in? 2. Any thoughts on what might be wrong ? 3. Will it be hard to fix ? Never had a rear end apart before. 4. Is rear end work relatively inexpensive for our trucks ? I am pressed for time, should I take it to a shop? Thanx in advance
__________________
1968 SWB Stepside, 250,pwr disc brake and tilt pwr steering, 5 spd tranny, HEI,Accel coil,K&N filter,Seat from a later truck with built in seatbelts, front and rear sway bars, moved gas tank to under the bed, headman hedders, new chrome bumpers,one wire alternator,Weber k550cub carburator...WORK IN PROGRESS, Freeland MI , Just bought a 72 Jimmy!!!!!!!!!!! |
|
|
| Bookmarks |
|
|
Threaded Mode