The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Suspension

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 07-26-2004, 04:48 AM   #1
Slammed '87
Registered User
 
Slammed '87's Avatar
 
Join Date: Feb 2003
Location: Calgary Canada
Posts: 556
Triangulated 4 Link

Awhile back i posted a thread on the pros and cons of parallel and triangulated 4 links. My deal was that i was going to be running a fat rim and tire combo and needed info on which was the best for minimal side to side sway. Just by how they are set up it was pretty obvious to me that the triangulated 4 link would be the ideal choice. A few board members at the time had told me otherwise, but i was skeptical and went ahead anyway. I have recently finished the install and just thought i would share my outcomes. Other than going into steep driveways or approaches, there is zero to minimal side to side sway!!! I couldn't be happier! I am still running my 15" rims with 265/50 rubber. The tires are about 3/16 of an inch away from the wheel wells. I can now cruise down the hiway at 140 kms, rear bumper 1' off the ground, no scrapping, no rubbing! So for any of you who may be thinking of going this route, to lay out and or run a tight rim/ tire combo, this is one way to go, i highly recommend it from personal experience!!! I will post pics at a later date, thanks guys!
Slammed '87 is offline   Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:24 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com