Brake Tubing - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*FormerMember* · 07-26-2004, 03:05 PM

Alright guys,
My buddies' try at bending stainless tubing has caused some major leakage. It was a solid effort, but the tubing is just too fawking thick.

So, I am looking at buying some prebent tubing.

The only problem, I am running a later model P/V that shold be mounted on the frame, instead of hanging it off the MC.

the PV I have used two ports for the front brakes instead of splitting the line from the PV like my 71 had.

Opinions on using a 73 Blazer line kit to fit my 71 Blazer?

07-26-2004, 03:05 PM	#1
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Brake Tubing Alright guys, My buddies' try at bending stainless tubing has caused some major leakage. It was a solid effort, but the tubing is just too fawking thick. So, I am looking at buying some prebent tubing. The only problem, I am running a later model P/V that shold be mounted on the frame, instead of hanging it off the MC. the PV I have used two ports for the front brakes instead of splitting the line from the PV like my 71 had. Opinions on using a 73 Blazer line kit to fit my 71 Blazer?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.