AN fittings and hose info

[kev2809]

OK, i am not quite done with getting my truck going (wiring still left), but i finished routing my fuel and trans lines a few months ago and figured i would share how i ran my set up. it seems hard to find a detailed listing, so im going to try and put up the part numbers i have. i know EVERY truck isnt the same, but it should help!

truck is a 67 suburban, donor motor is 5.3 with a 4l60e trans, both from a 2002 tahoe. lets start up front for cooling, because the fittings will vary depending on the radiator. i used AN-6 for everything.

the radiator i am using is a Spectra CU369.
https://www.amazon.com/Spectra-Premi...78e72037b8bddf

Radiator Fittings
the 2 fittings that screw into the radiator
SUM-220668B
Fitting, Adapter, AN to Inverted Flare, Straight, Aluminum, Black Anodized, -6 AN, 1/2-20 in. Inverted Flare, Each
(Mfr. #: SUM-220668B

These are the fittings that get "crimped" to the an line
RUS-610095
Fitting, Hose End, Full Flow, 45 Degree, -6 AN Hose to Female -6AN, Aluminum, Black, Each
(Mfr. #: 610095)

VPE-21906
Hose End, 90 Degree, -6 AN Female Thread, -6 AN Hose, Aluminum, Black, Each
(Mfr. #: 21906)
-----------------------------------------------

these 2 lines run from the radiator to the trans (i am not using an external trans cooler). off the transmission, you will need these 2 fittings (they come in a pair so only order 1)

ICB-551114
Fittings, Transmission Line Adapters, Aluminum, Natural, -6 AN Male Threads, 1/4 in. NPS Male Threads, TH350, TH400, 700R4, 200-4R, 4L60E, 4L80E, Pair
(Mfr. #: 551114)

For the an line, you will need to "crimp" these 2 fittings (1 for each line) to mate to the trans fittings

RUS-610095
Fitting, Hose End, Full Flow, 45 Degree, -6 AN Hose to Female -6AN, Aluminum, Black, Each
(Mfr. #: 610095)

-----------------------------------------------
For the lines, i went with the Evil Energy from amazon. heres a link and description, this is the same line i also used for the fuel lines

EVIL ENERGY 6AN Fuel line Hose Braided Nylon Stainless Steel Oil Gas CPE 20FT Black
https://www.amazon.com/dp/B07XG8JRPQ...993D13Q0W1SPYS
-----------------------------------------------
Now, on to the fuel setup. these fittings will obviously vary on what tank and sending unit you go with, and also if it returnless rail or not (mine is a return rail). i went with the most basic setup i can find that uses an in tank pump and baffled tank.

Fuel Tank
Spectra GM15C 25 gallon tank (87 blazer/suburban tank)

https://www.amazon.com/dp/B000C7QKIM...50BEXGF0VFNAAV

Sending unit
Dorman 692-056 Fuel Tank Sending Unit Compatible with Select Chevrolet / GMC Models

https://www.amazon.com/dp/B000CGGKU6...YWWJBCKYM41TQ3

Fuel Pump
GM Genuine Parts EP381 Electric Fuel Pump Kit with Seals, Clamp, and Baffle

https://www.amazon.com/dp/B000C9SHOU...E2QYKNMJQ6487Z

Fuel Filter

I chose to go with the stock filter from the local auto parts store.

Wix Fuel Filter Part # 33481
https://www.oreillyauto.com/detail/c...ix+33481&pos=0

And the clamp i used, which was a little big but it worked

EVIL ENERGY 60mm Car Fuel Pump Fuel Filter Mounting Bracket
https://www.amazon.com/dp/B07YV3RJPW...N323R2RBSGQ1QV