L98 Corvette 350 swap question

[95chev-w/t-guy]

I have the opportunity to get an L98 aluminum head 350 to replace the reliable, but quite gutless 305 in my 1984 C10. I'm getting it very very cheap from a friend. It's originally out of a Corvette he junked for other parts, he thinks it was a 1986. I plan to put a carb on it, so here is my question; exactly what intake am I looking for? I've looked over some TPI to carb swap info on other forums, but most just say you need an intake. Will I need a regular SBC intake, or one for 87-95 TBI, or Vortech intake?

And before anyone makes the point, I'm not keeping it TPI when it goes in the truck. I already have the mechanical fuel pump, HEI distributor, a great working carb, I just need an intake, and possibly a cam if the stock one doesn't have the eccentric for the fuel pump rod (some did, some didnt). For TPI I'd need alot more than that, and besides that the truck has always been carbureted and I enjoy it that way.

I believe this engine will be a good base to build on, but I plan on putting it in my truck basically stock for now.