Belltech 5952 Drop Leaves - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**rustytruck50** · 10-04-2022, 07:09 PM

Need some input....I'm looking at lowering my '05 rcsb Sierra and made plans on a 2/4 with spindles, shackles & hangers & then I saw the Belltech 5952 3" drop springs. Kinda on the fence now...the truck does have a slight bit of lean on the driver's side and my reasoning says replacing the 160k old rear springs could solve some issues. I've already replaced the front springs, so we're good there. Are these Belltech springs a good route or should I stick with the original plan?

10-04-2022, 07:09 PM	#1
rustytruck50 Senior Member Join Date: Feb 2011 Location: Papillion, Ne Posts: 897	Belltech 5952 Drop Leaves Need some input....I'm looking at lowering my '05 rcsb Sierra and made plans on a 2/4 with spindles, shackles & hangers & then I saw the Belltech 5952 3" drop springs. Kinda on the fence now...the truck does have a slight bit of lean on the driver's side and my reasoning says replacing the 160k old rear springs could solve some issues. I've already replaced the front springs, so we're good there. Are these Belltech springs a good route or should I stick with the original plan? __________________ -Doug '05 RCSB Sierra 2WD '71 Sierra 2WD Longbed '98 Silverado K1500 Xcab...sold '72 Highlander"Raymond"...sold



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.