|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
10-14-2023, 10:57 PM
|
#11 |
|
BMW & ASE Master Certified
Join Date: Feb 2004
Location: Houston, Texas
Posts: 1,266
|
Re: Anyone Ever Bent Their Trans Dipstick Tub
I bent a 6l80 tube with a tube bender to make it fit a little better. If you have the correct tube bender, then it will more than likely bend no problems. But if you don't have a bender, expect it to kink. If you have a 3d printer, you can print yourself the dies and make a home made bender for a few bucks. I made a set of 3d printed dies to bend some aluminum tubing for an a/c line project. I got the idea to 3d print a set of dies from youtube, these guys 3d printed dies to bend 1.5" steel tubing in a hydraulic tube bending machine... pretty cool
https://www.youtube.com/watch?v=R7y5MIux_uQ clint
__________________
1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes 1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD A poor man buy's it twice finally got my domain name back, 87chevy.com.... site rework in progress |
|
|
| Bookmarks |
|
|
Threaded Mode