The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 04-07-2024, 06:37 PM   #1
BrianTom
Registered User
 
Join Date: Feb 2023
Location: Huntsville
Posts: 1
Issues wityh 66 I6 starting

Hello,

My 66 C10 with an inline 6 (250, maybe) will crank, but it won't start. It sat for 10+years because of a fuel issue. I've replaced all the fuel lines, the fuel pump (old on was pumping gas into the crank case), and rebuilt the card. I also replaced the coil, spar plugs, and have a new battery. I testing the #1 spark plug wire with a volt meter and it seems like it's getting voltage and while cranking the voltage spikes up and drops as I'd expect.

I've tried to start it, but it seems like it's not doing much on anything it cranks, but its doesn't seem like it's trying to actually start. I can't tell if the it's cranking too slow or maybe timing is off? Blow is a link to the truck cranking...it's a short video, but there are no changes to the sound the last several times I've tried to start it after trouble shooting.

https://www.youtube.com/watch?v=fRUrfUo0mn8

Any constructive thoughts are welcome.

-Brian
BrianTom is offline   Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:34 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com