Quote:
Originally Posted by NGN
???? Sorry to High Jack this thread. I have a 67, once a three on the tree manual now a 350 automatic with a (71-72 ?) tilt installed. My question is were do I land the gray wire feed for the column indicator. My 67 is pretty much bare bone original as far as wiring. I don't have a 71or72 truck manual to go by for wiring. Any help appreciated, Thanks.
NGN
Nick
|
It would connect to a spade in the fuse panel at terminal "clstr. feed" On a 72 it is on the right top edge just below the 3a fuse. Not sure if present on earlier fuse panel.
11-21-2024, 04:31 PM
Threaded Mode