Part buffs... Please help me ID these gears!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

redz 1970 K5 · 09-03-2004, 02:14 AM

So, after a more careful examination of my gears during a drain/fill, I suspect I do NOT have 4.56's as advertised when purchased, or possibly WORSE different ratio's front/rear. I was going off of SOTP and what the PO told me when purchased. The front in particular I am about 99% sure are 3.73:1 just based on one full revolution of the ring to under 4 turns of the driveshaft.

Anyways, here are the stampings on the ring gears... ANY HELP in tracking these to what they actually are would be MOI appreciated.

FRONT-

10 2 69 DANA 18575 A3D85 41:11

REAR-

3817778 11:41 GM11752

Thanks in advance for ANY help!!!

09-03-2004, 02:14 AM	#1
redz 1970 K5 OBS guy Join Date: Jun 2004 Location: SoCal Posts: 1,060	Part buffs... Please help me ID these gears!!! So, after a more careful examination of my gears during a drain/fill, I suspect I do NOT have 4.56's as advertised when purchased, or possibly WORSE different ratio's front/rear. I was going off of SOTP and what the PO told me when purchased. The front in particular I am about 99% sure are 3.73:1 just based on one full revolution of the ring to under 4 turns of the driveshaft. Anyways, here are the stampings on the ring gears... ANY HELP in tracking these to what they actually are would be MOI appreciated. FRONT- 10 2 69 DANA 18575 A3D85 41:11 REAR- 3817778 11:41 GM11752 Thanks in advance for ANY help!!! __________________ 88 Suburban Goodies- Alpine, Auto Meter, BDS, Bilstein, B&M, BFG, Borgeson, Bushwhacker, Cowl hood, Flowmaster, Genuine Gear, Holley, Infinity, JVC, K&N, MB Wheels, MSD, Pioneer, Skyjacker, Sony, Thorley, Walker + more



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.