Aftermarket cruise, $40 plus shipping

[71swb4x4]

I have an aftermarket cruise setup that I pulled from a 71 pickup. The 5 wires between the interior pieces (switch and relay) and the speed box are cut, but they are color coded and just need to be spliced. It has 3 additional wires, I assume 1 for ground, 1 for power, not sure what the 3rd is for. It needs a vaccum supply, and then a vacuum line run to the throttle control. It has a short speedo cable that goes to your speedo. The cable that used to go to your speedo hooks up to the speed box, which will control the amount of vacuum that goes to the throttle control.
I do not know if this works, I pulled it out of a non-running truck. I think it's al there, except for the vacuum lines, they were pretty crusty.
It was made by Dana.
I can email you pictures.
Shawn