MSD 6 box mounting question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Cethern · 10-10-2004, 11:39 AM

Hi All

My project for this weekend is to get my HEI and a MSD 6 box installed, Yesterday I fabed up a bracket to mount the box inside. But the way I made up the mount the box will be upside down under the glove box. I didn't see to much of a problem but MSD says not mount the box this way for moisture reasons. I can see that if it was in the engine compartment but not inside the truck. But right now I have my doubts..So I thought I would ask you ppl and see if I need to fab up a new mount.
Thanks

Cethern

10-10-2004, 11:39 AM	#1
Cethern What was I thinking?? Join Date: Dec 2003 Location: Commerce City Co Posts: 636	MSD 6 box mounting question Hi All My project for this weekend is to get my HEI and a MSD 6 box installed, Yesterday I fabed up a bracket to mount the box inside. But the way I made up the mount the box will be upside down under the glove box. I didn't see to much of a problem but MSD says not mount the box this way for moisture reasons. I can see that if it was in the engine compartment but not inside the truck. But right now I have my doubts..So I thought I would ask you ppl and see if I need to fab up a new mount. Thanks Cethern __________________ 72 K5 that needs lots of parts.. 71 GMC 3/4 4x4 That doesn't need much which is a good thing I don't think I could aford another money pit...



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.