OT: Emblem removal on '84 C-10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mark25 · 06-29-2002, 02:17 PM

What is the simplest way to get the Silverado emblems off the front fenders without dismantling a whole lot of stuff??? mine is going to the paint shop on Monday and need to get them off. anybody????

**Desert Rat** · 07-01-2002, 12:53 PM

I removed all the emblems from my 79,and there was some that were pain,maybe drop the inner fenders?are you sure there not the ones with the glued on backs?that a putty knife will work loose?

**crossy** · 07-02-2002, 10:08 PM

a sharp putty knife. there are suds for alignment on the back in certain areas , when you come to them give the knife a good jab and shear the plastic stud off.

06-29-2002, 02:17 PM	#1
mark25 Registered User Join Date: Feb 2000 Location: Vassar,Ks 66543 Posts: 375	OT: Emblem removal on '84 C-10 What is the simplest way to get the Silverado emblems off the front fenders without dismantling a whole lot of stuff??? mine is going to the paint shop on Monday and need to get them off. anybody???? __________________ '72 C-10 Cheyenne Super, 402/TH400, Bucket Seats, tilt, tach, AM/FM & shoulder harnesses and a ground up restoration

07-02-2002, 10:08 PM	#3
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	emblem removal a sharp putty knife. there are suds for alignment on the back in certain areas , when you come to them give the knife a good jab and shear the plastic stud off. __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-01-2002, 12:53 PM	#2
Desert Rat Senior Member Join Date: Dec 1999 Location: Darrington, Washington Posts: 3,963	I removed all the emblems from my 79,and there was some that were pain,maybe drop the inner fenders?are you sure there not the ones with the glued on backs?that a putty knife will work loose?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.