S-10 parts needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

crews · 12-05-2004, 05:34 PM

Hey guys- I am looking for a decent front clip for a late 80's S-10. A buddy of mine wadded his up during our last snow "storm" (?) ..

A complete parts truck would be considered as well, if the price is right...Will travel for the right deal...

Any leads are appreciated...
Thanks-
crews

454_72_4X4 · 12-05-2004, 07:17 PM

I don't have a complete clip but I've got fenders, hood ,and grilles for 83-89 styles. I don't know what they're worth or which ones I might sell yet. (I'm trying to decide if I should rebuild my truck or try to buy a different one).

*bisquik65* · 12-05-2004, 07:23 PM

what motor is in it? All i have is a pair of fenders still bolted on support ,no hood or rad. on a 85 s-10 blazer ,no grille . $200 + shipping or all new aftermarket stuff. Hood,fenders,support,with used inner fenders,new grille and headlight doors,no rad for $450 + shipping with new front bumper. Western n.c. Erick

crews · 12-05-2004, 11:23 PM

Thanks for the replys- I am unsure what motor is in it...I think it is a 2.5/ 4 cyl....Does that make a difference in core supports?

I will pass the info along and see if we can get a deal put together.

Thanks!!
crews

*bisquik65* · 12-06-2004, 05:30 PM

No it just makes a differance in the fan shroud and rad. All supports from 82-90 are the same and 91-93 pickup and 91-94 blazer will interchange you just get the 91-93 grille,and make the truck look newer. I can do that for the same price on the new aftermarket stuff.Erick

longnlow72 · 12-10-2004, 11:21 PM

try s10forum.com also huge forum if you dont get what you need

75stepside · 12-11-2004, 12:14 AM

Quote:

Originally Posted by longnlow72

try s10forum.com also huge forum if you dont get what you need

i have an s10 daily driver and hang out at the s10 forum too... its an "okay" board, the moderators over there have huge egos and take every opportunity to show their "authority".... some of the guys rip you off... so be careful... lots of young guys there too.

btw, great sig

indianmotocycle2001 · 12-11-2004, 11:29 PM

I have the front end of a 88 s10 great shape. No hood just cut it up to use the metal on my 49 chev that I am putting on the S10 frame. I have everything else and the doors and a real nice long bed no dents in any of it except a small deng on the driver door. Make offer you still need them...I am in South Carolina.

12-05-2004, 05:34 PM	#1
crews It just doesn't matter Join Date: Apr 2001 Location: Huntington Beach, Ca Posts: 1,660	S-10 parts needed Hey guys- I am looking for a decent front clip for a late 80's S-10. A buddy of mine wadded his up during our last snow "storm" (?) .. A complete parts truck would be considered as well, if the price is right...Will travel for the right deal... Any leads are appreciated... Thanks- crews __________________ 05 Chevy Silverado..... A rogue BMW guy.... If you don't like me- TAKE A NUMBER; There are people ahead of you!!

12-05-2004, 07:17 PM	#2
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	I don't have a complete clip but I've got fenders, hood ,and grilles for 83-89 styles. I don't know what they're worth or which ones I might sell yet. (I'm trying to decide if I should rebuild my truck or try to buy a different one). __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey

12-05-2004, 11:23 PM	#4
crews It just doesn't matter Join Date: Apr 2001 Location: Huntington Beach, Ca Posts: 1,660	Thanks for the replys- I am unsure what motor is in it...I think it is a 2.5/ 4 cyl....Does that make a difference in core supports? I will pass the info along and see if we can get a deal put together. Thanks!! crews __________________ 05 Chevy Silverado..... A rogue BMW guy.... If you don't like me- TAKE A NUMBER; There are people ahead of you!!

12-10-2004, 11:21 PM	#6
longnlow72 Registered User Join Date: Aug 2004 Location: SW Washington Posts: 947	try s10forum.com also huge forum if you dont get what you need __________________ 72 Chevy lwb, cowl hood, shaved antenna, shaved bedrails, blazer tank, sidemarker fill, 1pc windows, flowmaster 40's, alpine deck, infinity 6x9's, infinity 4"ers, 2 jl audio 10w0's, grant wheel, keyless entry and alarm, more waiting to be done...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-05-2004, 07:23 PM	#3
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	what motor is in it? All i have is a pair of fenders still bolted on support ,no hood or rad. on a 85 s-10 blazer ,no grille . $200 + shipping or all new aftermarket stuff. Hood,fenders,support,with used inner fenders,new grille and headlight doors,no rad for $450 + shipping with new front bumper. Western n.c. Erick

12-06-2004, 05:30 PM	#5
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	No it just makes a differance in the fan shroud and rad. All supports from 82-90 are the same and 91-93 pickup and 91-94 blazer will interchange you just get the 91-93 grille,and make the truck look newer. I can do that for the same price on the new aftermarket stuff.Erick

12-11-2004, 11:29 PM	#8
indianmotocycle2001 Registered User Join Date: Sep 2004 Posts: 80	I have the front end of a 88 s10 great shape. No hood just cut it up to use the metal on my 49 chev that I am putting on the S10 frame. I have everything else and the doors and a real nice long bed no dents in any of it except a small deng on the driver door. Make offer you still need them...I am in South Carolina.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.