89 C1500 W/T For Parts - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*1972C10* · 10-16-2004, 01:09 AM

TTT About To Have Cab Removed, Building Truck bed Trailer Out the rest. The cab Has A Hole In the roof for a VHF Antenna Otherwise Clean Cab. Doors/ Fenders/Coresupport/EvapCoils/ Ac Controls/ And many other parts still avaialble.

ndamood · 11-26-2004, 09:47 PM

Do you still have the 427 engine for sale & if so is it all complete?

ndamood · 11-26-2004, 09:49 PM

not sure if I sent this to the right person, But do you have the 427 engine up for sale? please let me know.

*1972C10* · 11-27-2004, 04:55 AM

You must be confused .. I have no 427

*GOY* · 11-27-2004, 08:17 PM

Can you take a picture of the intrusment cluster - and how much you would want for it. Also - list if there are any guages that are "Twitchy" or not always functional.

*1972C10* · 11-28-2004, 06:16 AM

Pics can be viewed 15 posts up from this one.. The gas gauge and speedometer work fine no twitcyness.

swbls12b · 11-28-2004, 10:04 AM

How much for the A/C controls and shipping to 67209?

*1972C10* · 11-28-2004, 12:41 PM

There is a pic of the ac controls on the first page.. Ill take 25 Plus 15 shipping so 40 bucks shipped. Let me know.

tx_fireman1525 · 12-02-2004, 01:14 PM

What part of DFW are you in?

*1972C10* · 12-03-2004, 01:33 AM

Im Not acutally in DFW I live in an Armpit of a town so i just put a landmark for the location ..

Im located in quinlan 75474

bluestreak52 · 12-11-2004, 09:24 PM

I am looking for a vergin crank shaft how much for yours

*1972C10* · 12-12-2004, 05:38 AM

Im Uncertain as to the condition I assume it to be STD As the bores are but you never know.

Id have to have 75 for it Mainly due to haveing to pull a good engine apart to remove it Id pull a main and a rod if you were seriously interested to see if it has been ground or not.

You dont have any local engine builders? They could get you one turned down to 0.10 ready to install Or even get a STD. one Would be cheaper than shipping too.

*GOY* · 12-14-2004, 02:37 PM

check your pm

GM-TECH · 12-16-2004, 03:09 AM

I am looking for a solid one piece rear window for a 93 std cab.

*1972C10* · 12-16-2004, 04:26 AM

Sorry ive already sold the rear window locally.

Ogdenville · 01-05-2005, 05:20 PM

Quote:

Originally Posted by 1972C10

Few more pics added Will Take 40$ For the evap coils and all hardware that atttachs it It looks ruff but system had freon in it still so no leaks.

You still parting this truck out?
I'm interested in your grill, radiator, and the front end support that spans the front of the truck and connects to right and left panels (don't know the name of the part)
thanks

*1972C10* · 01-06-2005, 04:28 AM

I Still Have Those Parts You Local? Prices are listed on the prior page as well as pictures.

Hoods69BadBowTie · 01-06-2005, 06:40 AM

I just read this and I have an '88 Chevy Pick-up Standard Cab, and my air vent on the right side of the glove box is broken. I believe it just un-bolts with 2-4 screws. I was wondering if you still had this and if so, I have n't been able to find one locally and it might be cheaper to get 1 from you.
Zip is 59801. Thanx

Ogdenville · 01-06-2005, 02:08 PM

Quote:

Originally Posted by 1972C10

I Still Have Those Parts You Local? Prices are listed on the prior page as well as pictures.

I'm actually from Ogden Utah, I imagine this will make it more difficult.
I'm interested in the parts, your prices are good.
Would you still be interested in sending these parts out here?
And the front end support that spans the front of the truck and connects to right and left panels, is that called the "core support"?
thank you

*1972C10* · 01-06-2005, 07:23 PM

Yeah its the core support I dont have a problem packing them up if you want to pay the shipping.

Id Take 60 for the core support. 40 for the grille and 20 for the radiator its a one row.

Ill check the air vent shortly..

Ogdenville · 01-07-2005, 07:56 PM

Quote:

Originally Posted by 1972C10

Yeah its the core support I dont have a problem packing them up if you want to pay the shipping.

Id Take 60 for the core support. 40 for the grille and 20 for the radiator its a one row.

Ill check the air vent shortly..

cool.
check your pm's.

*1972C10* · 01-09-2005, 09:20 PM

Are you Talking About The A/C Vent?

nite53 · 01-14-2005, 08:40 PM

I left you a PM re: parts

11-26-2004, 09:47 PM	#52
ndamood Registered User Join Date: Aug 2004 Location: williamsburg, va. Posts: 18	do you still have? Do you still have the 427 engine for sale & if so is it all complete?

12-02-2004, 01:14 PM	#59
tx_fireman1525 Registered User Join Date: Feb 2004 Location: Covington, TX Posts: 25	What part of DFW are you in? __________________ ]'76 K10 Short Step WORK IN PROGRESS '81 C10 Longbed, 250/SM465 '93 Dodge W-250 X-Cab, Cummins NV4500/NP241, D60 front, D70 rear '05 Yamaha Grizzly 660 4x4 Southern Bowties Member

12-11-2004, 09:24 PM	#61
bluestreak52 Registered User Join Date: Mar 2002 Location: Harrisville,Pa. "USA" Posts: 222	Parts I am looking for a vergin crank shaft how much for yours

12-16-2004, 03:09 AM	#64
GM-TECH Registered User Join Date: Oct 2004 Location: Sacramento Posts: 42	I am looking for a solid one piece rear window for a 93 std cab. __________________ I Have No Competition, Only CompetitorsThat's Why I Have Rear View Mirrors, So I can See You

01-06-2005, 06:40 AM	#68
Hoods69BadBowTie Chevys Kick A$$ Join Date: Jan 2005 Location: Zootown, MT Posts: 12,699	Air Vents? I just read this and I have an '88 Chevy Pick-up Standard Cab, and my air vent on the right side of the glove box is broken. I believe it just un-bolts with 2-4 screws. I was wondering if you still had this and if so, I have n't been able to find one locally and it might be cheaper to get 1 from you. Zip is 59801. Thanx

10-16-2004, 01:09 AM	#51
1972C10 Account Suspended Join Date: Dec 2003 Location: Texas Posts: 2,686	TTT About To Have Cab Removed, Building Truck bed Trailer Out the rest. The cab Has A Hole In the roof for a VHF Antenna Otherwise Clean Cab. Doors/ Fenders/Coresupport/EvapCoils/ Ac Controls/ And many other parts still avaialble.

11-26-2004, 09:49 PM	#53
ndamood Registered User Join Date: Aug 2004 Location: williamsburg, va. Posts: 18	not sure if I sent this to the right person, But do you have the 427 engine up for sale? please let me know.

11-27-2004, 04:55 AM	#54
1972C10 Account Suspended Join Date: Dec 2003 Location: Texas Posts: 2,686	You must be confused .. I have no 427

11-27-2004, 08:17 PM	#55
GOY Banned Join Date: Nov 2004 Posts: 37	Can you take a picture of the intrusment cluster - and how much you would want for it. Also - list if there are any guages that are "Twitchy" or not always functional.

11-28-2004, 06:16 AM	#56
1972C10 Account Suspended Join Date: Dec 2003 Location: Texas Posts: 2,686	Pics can be viewed 15 posts up from this one.. The gas gauge and speedometer work fine no twitcyness.

11-28-2004, 10:04 AM	#57
swbls12b Registered User Join Date: Oct 2004 Location: Wichita, Ks Posts: 88	How much for the A/C controls and shipping to 67209?

11-28-2004, 12:41 PM	#58
1972C10 Account Suspended Join Date: Dec 2003 Location: Texas Posts: 2,686	There is a pic of the ac controls on the first page.. Ill take 25 Plus 15 shipping so 40 bucks shipped. Let me know.

12-03-2004, 01:33 AM	#60
1972C10 Account Suspended Join Date: Dec 2003 Location: Texas Posts: 2,686	Im Not acutally in DFW I live in an Armpit of a town so i just put a landmark for the location .. Im located in quinlan 75474

12-12-2004, 05:38 AM	#62
1972C10 Account Suspended Join Date: Dec 2003 Location: Texas Posts: 2,686	Im Uncertain as to the condition I assume it to be STD As the bores are but you never know. Id have to have 75 for it Mainly due to haveing to pull a good engine apart to remove it Id pull a main and a rod if you were seriously interested to see if it has been ground or not. You dont have any local engine builders? They could get you one turned down to 0.10 ready to install Or even get a STD. one Would be cheaper than shipping too.

12-14-2004, 02:37 PM	#63
GOY Banned Join Date: Nov 2004 Posts: 37	check your pm



Register or Log In To remove these advertisements.

12-16-2004, 04:26 AM	#65
1972C10 Account Suspended Join Date: Dec 2003 Location: Texas Posts: 2,686	Sorry ive already sold the rear window locally.

01-06-2005, 04:28 AM	#67
1972C10 Account Suspended Join Date: Dec 2003 Location: Texas Posts: 2,686	I Still Have Those Parts You Local? Prices are listed on the prior page as well as pictures.

01-06-2005, 07:23 PM	#70
1972C10 Account Suspended Join Date: Dec 2003 Location: Texas Posts: 2,686	Yeah its the core support I dont have a problem packing them up if you want to pay the shipping. Id Take 60 for the core support. 40 for the grille and 20 for the radiator its a one row. Ill check the air vent shortly..

01-09-2005, 09:20 PM	#72
1972C10 Account Suspended Join Date: Dec 2003 Location: Texas Posts: 2,686	Are you Talking About The A/C Vent?

01-14-2005, 08:40 PM	#73
nite53 Registered User Join Date: Dec 2004 Location: Myrtle Beach, S.C. Posts: 37	PLZ check Your PM'S! I left you a PM re: parts __________________ MY TOYS: 1964 XLH Sportster 1973 HD Sportster 1974 HD Sportster 1987 HD FXR Super Glide 2004 HD Sportster 1989 Chevy Dually, 1992 Chevy Van,1991 Pontiac Sunbird Conv, 1967 Chevy PU, 1977 Chevy Van, 1963 Chevy Nova,1963 Chevy Nova SS, 1953 Chevy Panel Van

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.