I need a 3/4 or 1 ton rearend - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Nick's683/4 · 02-01-2005, 03:18 AM

I am looking for a ho52 or a 14 built 1 ton rearend. They need to be in Norcal or up in Reno (i'm headed up there soon). They need to be 4:10 grears.

Thanks Nick

Jeremy_5 · 02-01-2005, 05:05 AM

I will look at my buddy's house and see if he has a 14 bolt, he has a bunch of axles laying around. I am on the way to Reno

extd56 · 02-01-2005, 10:38 AM

I will be pulling a 3/4 ton rear end out of a 67 GMC soon.

**67sss** · 02-01-2005, 03:11 PM

here's you go, and only 11 or 12 hours north of you.http://67-72chevytrucks.com/vboard/s....php3?t=129495

Nick's683/4 · 02-01-2005, 07:29 PM

jeremy let me know if he has one. I know somthing is going to happen to this rearend. I got a big right foot and to much power.

extd56 what do you want to sell it for?

67sss thanks for the info but i didnt want to drive that far. I would pay more in gas then i would for the whole truck.

extd56 · 02-01-2005, 07:31 PM

250.00 for the rearend. It is still in the truck.

Nick's683/4 · 02-01-2005, 07:50 PM

what rearend is it? what grears? locker? and any pics?

Thanks Nick

extd56 · 02-01-2005, 08:17 PM

I will take pictures of it tomorrow, it is up by Chico, I have run out of room at my house.

Nick's683/4 · 02-01-2005, 08:45 PM

Is it a 4X4 truck i might want to get a front end too

Jeremy_5 · 02-01-2005, 10:39 PM

nick, went out there today. I couldn't find one. Sorry

extd56 · 02-01-2005, 10:48 PM

It is a 2 wheel drive truck. I will be selling the front suspension too.

Nick's683/4 · 02-02-2005, 06:36 PM

I was looking for a dana 44 front end for a 4X4

Jeremy thsnks for looking. have you started puting your 454 in yet?

extd56 · 02-02-2005, 09:11 PM

Here is the picture of the rear end. I do not know the ratio until I get a chance to pull it out.

02-01-2005, 03:18 AM	#1
Nick's683/4 Registered User Join Date: Apr 2004 Location: Oakley CA Posts: 165	I need a 3/4 or 1 ton rearend I am looking for a ho52 or a 14 built 1 ton rearend. They need to be in Norcal or up in Reno (i'm headed up there soon). They need to be 4:10 grears. Thanks Nick __________________ 70 1 ton with a 454 and a 4 speed and a np205

02-01-2005, 05:05 AM	#2
Jeremy_5 Truck addict Join Date: Sep 2003 Location: Lincoln, California Posts: 497	I will look at my buddy's house and see if he has a 14 bolt, he has a bunch of axles laying around. I am on the way to Reno __________________ 1956 Chevy Napco 1972 Cheyenne Super 1970 K20

02-01-2005, 07:29 PM	#5
Nick's683/4 Registered User Join Date: Apr 2004 Location: Oakley CA Posts: 165	jeremy let me know if he has one. I know somthing is going to happen to this rearend. I got a big right foot and to much power. extd56 what do you want to sell it for? 67sss thanks for the info but i didnt want to drive that far. I would pay more in gas then i would for the whole truck. __________________ 70 1 ton with a 454 and a 4 speed and a np205

02-01-2005, 07:50 PM	#7
Nick's683/4 Registered User Join Date: Apr 2004 Location: Oakley CA Posts: 165	what rearend is it? what grears? locker? and any pics? Thanks Nick __________________ 70 1 ton with a 454 and a 4 speed and a np205

02-01-2005, 08:45 PM	#9
Nick's683/4 Registered User Join Date: Apr 2004 Location: Oakley CA Posts: 165	Is it a 4X4 truck i might want to get a front end too __________________ 70 1 ton with a 454 and a 4 speed and a np205

02-01-2005, 10:38 AM	#3
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	I will be pulling a 3/4 ton rear end out of a 67 GMC soon.

02-01-2005, 03:11 PM	#4
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,326	here's you go, and only 11 or 12 hours north of you.http://67-72chevytrucks.com/vboard/s....php3?t=129495

02-01-2005, 07:31 PM	#6
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	250.00 for the rearend. It is still in the truck.

02-01-2005, 08:17 PM	#8
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	I will take pictures of it tomorrow, it is up by Chico, I have run out of room at my house.

02-01-2005, 10:39 PM	#10
Jeremy_5 Truck addict Join Date: Sep 2003 Location: Lincoln, California Posts: 497	nick, went out there today. I couldn't find one. Sorry __________________ 1956 Chevy Napco 1972 Cheyenne Super 1970 K20

02-01-2005, 10:48 PM	#11
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	It is a 2 wheel drive truck. I will be selling the front suspension too.

02-02-2005, 06:36 PM	#12
Nick's683/4 Registered User Join Date: Apr 2004 Location: Oakley CA Posts: 165	I was looking for a dana 44 front end for a 4X4 Jeremy thsnks for looking. have you started puting your 454 in yet? __________________ 70 1 ton with a 454 and a 4 speed and a np205

02-02-2005, 09:11 PM	#13
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	Here is the picture of the rear end. I do not know the ratio until I get a chance to pull it out. Attached Images

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.