Disk brake conversion

[GMCPaul]

If you want to change upper & lower ball joints, inner & outer tie rods w/adjusting sleeves ( or outer tie rods & $70 inner to outer adapter adjusting sleeves )& center link you can use 71-87 1/2 ton spindles.
or we carry 63-70 drop spindles or stock height spindles for disc brake conversions, then you change no steering or suspension parts as they are built to use all stock parts, and for brakes you use 71-87 GM truck calipers, rotors, bearings & seals.
You'll find our spindles & brake parts here
http://www.gmcpauls.com/Suspension.htm

http://www.gmcpauls.com/Brakes&Steering.htm

GMCPaul