73-87 Garage Sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**brakenit** · 02-25-2005, 05:34 PM

I've got a some parts laying around I'd like to have out of my way. If you need something not listed just ask, I've parted out a few of these trucks and I might have it. Everything is OBO, if you want it we can probably work something out.

1. 14 bolt rear, full floater 3.73 gears pulled from a 79 3/4 ton. I drove the truck before it was pulled and there was nothing wrong with this. Complete from drum to drum and still has 8 lug steel wheels w/ 31X10.50 tires on theml. $150.

2. Pair of good doors. One has minor surface rust on inside lower edge, it's an original GM door with the tripod style mirror and full Silverado trim from a 79. The other is an aftermarket, complete with no mirror or trim holes. $150 for the pair.

3. 73-80 drivers side fender. Good condition, minor surface rust. Still mounted to inner fender, inner fender in useable shape but has a 5X5 rust hole towards the back. $50

4. 73-80 hood. Good condition, no rust. Two small dents in top, would be easy to fix. No rust. $50

5. 79 tilt column. It's a little loose, from a truck w/cruise. $100

6. 81-87 hood. Brand new in box. It's an aftermarket hood I picked up for cheap. It's got a kink on the top along the edge on one side, doesn't look like the hood itself is bent it's just low quality. $50

I've also got an 84 Silverado parts truck in the garage I'll be getting rid of soon. It's got power windows/locks and a good solid rear window. Would consider getting rid of complete truck for cheap but will likely be parting it out within the next month. I want it out of my way. No engine/trans - most underhood stuff is gone.

*1FaastC10* · 02-25-2005, 05:43 PM

hey man, i see you've been here for a while, but only have 3 posts. welcome to the board! where in IN are you? i'm in Elkhart.

75stepside · 02-25-2005, 05:55 PM

looking for a power lock/door relay... should be under the dash in the middle... silver box w/ 2 holes that mount it and it has two small plugs on it.

let me know!

thank you!

PRUNEDA · 02-25-2005, 06:02 PM

Hey on that 84 chevy that you're gonna part out does it have the stock wheels (rallies) by any chance??

**brakenit** · 02-25-2005, 07:25 PM

Quote:

Originally Posted by 1FaastC10

hey man, i see you've been here for a while, but only have 3 posts. welcome to the board! where in IN are you? i'm in Elkhart.

I joined last year and kind of forgot about it. I lurk around over here alot, there is a lot of good info to be had. I've been an active member over at fullsizechevy.com for a while to but there doesn't seem to be as big of a 73-87 following. I've also noticed there seems to be more people from the midwest over here as well. They're both good places for info either way and I'll probably be around both for a while. I'm about 40 miles northwest of Indy and 30 minutes south of Lafayette in Crawfordsville. Thanks for the welcome.

Quote:

Originally Posted by 75stepside

looking for a power lock/door relay... should be under the dash in the middle... silver box w/ 2 holes that mount it and it has two small plugs on it.

let me know!

thank you!

I haven't touched the interior of the 84 yet so it should still be there. I'll see if I can find it tonight and pull it out of there, let me know what it's worth. I'm reasonable on pricing.

Quote:

Originally Posted by PRUNEDA

Hey on that 84 chevy that you're gonna part out does it have the stock wheels (rallies) by any chance??

Sorry, I don't have the stock rallies. I've got a set of the 454SS style wheels though that I might let go of. They're not perfect but from 5 feet away they look good. Let me know if you're interested. I can include the center caps w/lug covers and a set of special lug nuts with the external thread to mount them on a 73-87 (88-up has 14 mm wheel studs and 73-87 is 1/2 in.)

cochino12 · 02-25-2005, 07:30 PM

If the '84 has delay wipers I'll take the switch.

**Ironhorse** · 02-25-2005, 07:40 PM

What sort of shape is the dash pad? Any cracks or tears? Need one for my '91 Burb. Price and shipping to 67152 if pad is good?

**brakenit** · 02-25-2005, 08:15 PM

Sorry, no delay wipers and I don't have any good dash pads.

beaterC10 · 02-25-2005, 08:20 PM

What shape are the vent windows and body on the 84 parts truck. Any more details on it?

**brakenit** · 02-25-2005, 08:40 PM

Vent windows are in good shape. Doors and bed are junk. Drivers side fender is good, passenger side fender has dent in front, no hood. Cab is fairly solid and would be easily saveable. Floor is solid, I don't think there's any through rust in rockers but I think it has a couple small holes in the cab corners so they would need to be replaced. It's an A/C cab. I don't have a title for it. It's in the garage right now so it would be kind of hard to get a pic of it, if I've got time I might be able to pull it out this weekend and get a shot of it if you're interested.

Wertzy · 02-25-2005, 09:43 PM

Any pictures of the hood? Please send some to wertzy@gmail.com

Thanks.

**brakenit** · 02-25-2005, 10:56 PM

Which hood?

twxsby · 02-26-2005, 02:23 AM

Does it have the (4) door pull strap covers?

soleeagle · 02-27-2005, 12:53 AM

Sent you a PM on the axle.

**brakenit** · 02-27-2005, 01:28 AM

Quote:

Originally Posted by twxsby

Does it have the (4) door pull strap covers?

Sorry, the strap cover were already missing.

Quote:

Originally Posted by soleeagle

Sent you a PM on the axle.

Back atcha.

allthrtl · 02-27-2005, 01:57 AM

I would be interested in the entire power window and lock setup from the 84??? shoot me a price...

**brakenit** · 02-27-2005, 02:02 AM

What do you consider complete? Is the wiring harness for those stand alone or are you going to need the entire interior harness? Door panels? I honestly don't know what a setup like this goes for so I'll have to get back with you on a price.

allthrtl · 02-27-2005, 02:10 AM

I think the wiring is mostly stand alone, but I'd settle for whatever I can get. I can wire up the rest if need be, but as much as possible would be great... Just let me know when you get a price... you can email me at
allthrtl(at)cox.net

**brakenit** · 02-27-2005, 02:18 AM

I'll be outside working on the yard tomorrow since it's actually supposed to be nice. I'll try to get out there and see what I can get off of it. I'm willing to let go of all of it, did you want the door panels as well?

allthrtl · 02-27-2005, 02:23 AM

Great....at this point I don't think I need the door panels, but you can give me a price, what color and what shape are they in???

**brakenit** · 02-27-2005, 02:25 AM

They're maroon, fair condition I'll see if I can snap some pics tomorrow.

02-25-2005, 05:34 PM	#1
brakenit Active Member Join Date: Mar 2004 Location: Indiana Posts: 198	73-87 Garage Sale I've got a some parts laying around I'd like to have out of my way. If you need something not listed just ask, I've parted out a few of these trucks and I might have it. Everything is OBO, if you want it we can probably work something out. 1. 14 bolt rear, full floater 3.73 gears pulled from a 79 3/4 ton. I drove the truck before it was pulled and there was nothing wrong with this. Complete from drum to drum and still has 8 lug steel wheels w/ 31X10.50 tires on theml. $150. 2. Pair of good doors. One has minor surface rust on inside lower edge, it's an original GM door with the tripod style mirror and full Silverado trim from a 79. The other is an aftermarket, complete with no mirror or trim holes. $150 for the pair. 3. 73-80 drivers side fender. Good condition, minor surface rust. Still mounted to inner fender, inner fender in useable shape but has a 5X5 rust hole towards the back. $50 4. 73-80 hood. Good condition, no rust. Two small dents in top, would be easy to fix. No rust. $50 5. 79 tilt column. It's a little loose, from a truck w/cruise. $100 6. 81-87 hood. Brand new in box. It's an aftermarket hood I picked up for cheap. It's got a kink on the top along the edge on one side, doesn't look like the hood itself is bent it's just low quality. $50 I've also got an 84 Silverado parts truck in the garage I'll be getting rid of soon. It's got power windows/locks and a good solid rear window. Would consider getting rid of complete truck for cheap but will likely be parting it out within the next month. I want it out of my way. No engine/trans - most underhood stuff is gone.

02-25-2005, 07:30 PM	#6
cochino12 It followed me home? Join Date: Mar 2003 Location: Yup Posts: 5,751	If the '84 has delay wipers I'll take the switch. __________________ Adam That's why they call it a shortcut Kyle, if it was easy it would just be the way. 86 c-10 SWB 85 CCSB 90 GMC K30 Crew SRW 1985 C30 Dually

02-25-2005, 07:40 PM	#7
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	What sort of shape is the dash pad? Any cracks or tears? Need one for my '91 Burb. Price and shipping to 67152 if pad is good? __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

02-26-2005, 02:23 AM	#13
twxsby Registered User Join Date: Apr 2003 Location: Cypress, TX Posts: 81	Does it have the (4) door pull strap covers? __________________ 84 K-20 Burb 94 Ranger 4X4

02-27-2005, 12:53 AM	#14
soleeagle Registered User Join Date: Sep 2003 Location: Shelbyville, Indiana Posts: 614	Sent you a PM on the axle. __________________ Chuck '85 Chevy Silverado 4X4 '91 Chevy 4X4 Suburban http://www.cardomain.com/memberpage/545941

02-25-2005, 05:43 PM	#2
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	hey man, i see you've been here for a while, but only have 3 posts. welcome to the board! where in IN are you? i'm in Elkhart.

02-25-2005, 05:55 PM	#3
75stepside Proud Member Join Date: Nov 2002 Location: Pittsburgh, PA Posts: 741	looking for a power lock/door relay... should be under the dash in the middle... silver box w/ 2 holes that mount it and it has two small plugs on it. let me know! thank you!

02-25-2005, 06:02 PM	#4
PRUNEDA '87 Join Date: Jun 2004 Location: Katy, TX Posts: 632	Hey on that 84 chevy that you're gonna part out does it have the stock wheels (rallies) by any chance??

02-25-2005, 08:15 PM	#8
brakenit Active Member Join Date: Mar 2004 Location: Indiana Posts: 198	Sorry, no delay wipers and I don't have any good dash pads.

02-25-2005, 08:20 PM	#9
beaterC10 Senior Member Join Date: Jul 2003 Location: Indianapolis, IN Posts: 1,277	What shape are the vent windows and body on the 84 parts truck. Any more details on it?

02-25-2005, 08:40 PM	#10
brakenit Active Member Join Date: Mar 2004 Location: Indiana Posts: 198	Vent windows are in good shape. Doors and bed are junk. Drivers side fender is good, passenger side fender has dent in front, no hood. Cab is fairly solid and would be easily saveable. Floor is solid, I don't think there's any through rust in rockers but I think it has a couple small holes in the cab corners so they would need to be replaced. It's an A/C cab. I don't have a title for it. It's in the garage right now so it would be kind of hard to get a pic of it, if I've got time I might be able to pull it out this weekend and get a shot of it if you're interested.

02-25-2005, 09:43 PM	#11
Wertzy Anti-Rice Join Date: Nov 2004 Location: Warren, PA Posts: 69	Any pictures of the hood? Please send some to wertzy@gmail.com Thanks.

02-25-2005, 10:56 PM	#12
brakenit Active Member Join Date: Mar 2004 Location: Indiana Posts: 198	Which hood?

02-27-2005, 01:57 AM	#16
allthrtl Available for Adoption Join Date: May 2003 Location: Lubbock Tx Posts: 177	I would be interested in the entire power window and lock setup from the 84??? shoot me a price... __________________ 1983 C10 SWB 2001 Silverado SWB 1995 Corvette

02-27-2005, 02:02 AM	#17
brakenit Active Member Join Date: Mar 2004 Location: Indiana Posts: 198	What do you consider complete? Is the wiring harness for those stand alone or are you going to need the entire interior harness? Door panels? I honestly don't know what a setup like this goes for so I'll have to get back with you on a price.



Register or Log In To remove these advertisements.

02-27-2005, 02:10 AM	#18
allthrtl Available for Adoption Join Date: May 2003 Location: Lubbock Tx Posts: 177	I think the wiring is mostly stand alone, but I'd settle for whatever I can get. I can wire up the rest if need be, but as much as possible would be great... Just let me know when you get a price... you can email me at allthrtl(at)cox.net __________________ 1983 C10 SWB 2001 Silverado SWB 1995 Corvette

02-27-2005, 02:18 AM	#19
brakenit Active Member Join Date: Mar 2004 Location: Indiana Posts: 198	I'll be outside working on the yard tomorrow since it's actually supposed to be nice. I'll try to get out there and see what I can get off of it. I'm willing to let go of all of it, did you want the door panels as well?

02-27-2005, 02:23 AM	#20
allthrtl Available for Adoption Join Date: May 2003 Location: Lubbock Tx Posts: 177	Great....at this point I don't think I need the door panels, but you can give me a price, what color and what shape are they in??? __________________ 1983 C10 SWB 2001 Silverado SWB 1995 Corvette

02-27-2005, 02:25 AM	#21
brakenit Active Member Join Date: Mar 2004 Location: Indiana Posts: 198	They're maroon, fair condition I'll see if I can snap some pics tomorrow.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.