1972 Chevy Cheyenne F/S - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Shane's Parts · 02-24-2005, 05:12 AM

I'm posting this for a friend at work. I'm copying his flyer he's put up at work.

It's a 1972 1/2 ton chevy cheyenne factory big block 402 w/extra motor. Motor in truck has 70,000 miles on rebuild. Motor on stand has 30,000 miles with a bad head. Includes 95% of parts to rebuild truck and the following new parts: exterior chrome door handles, outer grille, side marker lights, windshield washer motor, tubes in dash for air and heat, felt on vents, glove box, blazer gas tank, inner fenders, rubber for doors and windows, felt for windows,cab mounts, cab corners, rockers, floor pans, 3 extra doors, 2 extra hoods, 1 extra rear axle, extra upper and lower control arms, extra spindles, and kick panels. This truck is completly rust free. Passenger side of body completed with rockers and cab corners molded together. Driver's side needs bondo to be completed. Gas tank behind seat has been removed and floor pan has been repaired. All good factory exterior metal fenders, doors, tailgate, and bed in excellent condition. Needs to be finished and put back together. Frame has been sandblasted and painted, with new seals, bearings, and brake cables. Fuel Lines have been run to blazer tank in rear of bed. Gas door has been put inside of bed for the second tank and needs lines run to it. This will make someone a real nice truck. Lots of work already done. Close to $7,000.00 Invested. Asking $3,500.00 or best offer..

If you have any questions or comments please contact Russell at (816) 896-7295 or (816) 903-5551. Or you can e-mail him at Russell-Hughs@yahoo.com[IMG]russ1[/IMG]

HuggerCST · 02-24-2005, 05:22 AM

Do you know if it's a short or long bed?

Shane's Parts · 02-24-2005, 05:24 AM

If someone could help me post the pics I would appreciate it. I tried several times but with no luck. I have all the pics on file, if someone could help me post them, that way everyone could see what he is selling. Thanks to whoever takes the time to help me get the pics on the thread. Shane

Shane's Parts · 02-24-2005, 05:26 AM

this is a long bed truck. Once I get the pics online everyone could see. Sorry for the delay on the pics..

teeitup · 02-24-2005, 05:30 AM

Hey Shane been awhile, sorry I'm not good with the pics deal BUT I'm interested in the truck. Thanks Randy

Shane's Parts · 02-24-2005, 08:11 PM

Teeitup, yeah I've been really busy adding onto the house. Adding 1050 square foot. Yeah, I know quite an addition however it's needed for a growing family. I'll send you a pm. Kingsolver I'll e-mail the pics over to you. Thanks for getting them posted for me(actually I doing a favor for another guy by posting this, he couldn't figure out how to post it).

teeitup · 02-25-2005, 12:46 AM

Hey Shane, I was bidding on that set up on ebay I think, it was a month or so ago. I'll pm you back, Thanks Randy

Shane's Parts · 03-07-2005, 09:05 PM

I was only posting this for a friend at work. He tried to sell it all on e-bay a month or 2 ago, but wasn't satisfied with the results. However, thanks to everyone for their interest in the truck and all the parts.
-----------------------------------------------------------------------------------THE TRUCK IS NOW SOLD TO : SCJ

Thanks again to everyone for their interest.

02-24-2005, 05:12 AM	#1
Shane's Parts Registered User Join Date: Jan 2003 Location: Kansas City, Mo Posts: 267	1972 Chevy Cheyenne F/S I'm posting this for a friend at work. I'm copying his flyer he's put up at work. It's a 1972 1/2 ton chevy cheyenne factory big block 402 w/extra motor. Motor in truck has 70,000 miles on rebuild. Motor on stand has 30,000 miles with a bad head. Includes 95% of parts to rebuild truck and the following new parts: exterior chrome door handles, outer grille, side marker lights, windshield washer motor, tubes in dash for air and heat, felt on vents, glove box, blazer gas tank, inner fenders, rubber for doors and windows, felt for windows,cab mounts, cab corners, rockers, floor pans, 3 extra doors, 2 extra hoods, 1 extra rear axle, extra upper and lower control arms, extra spindles, and kick panels. This truck is completly rust free. Passenger side of body completed with rockers and cab corners molded together. Driver's side needs bondo to be completed. Gas tank behind seat has been removed and floor pan has been repaired. All good factory exterior metal fenders, doors, tailgate, and bed in excellent condition. Needs to be finished and put back together. Frame has been sandblasted and painted, with new seals, bearings, and brake cables. Fuel Lines have been run to blazer tank in rear of bed. Gas door has been put inside of bed for the second tank and needs lines run to it. This will make someone a real nice truck. Lots of work already done. Close to $7,000.00 Invested. Asking $3,500.00 or best offer.. If you have any questions or comments please contact Russell at (816) 896-7295 or (816) 903-5551. Or you can e-mail him at Russell-Hughs@yahoo.com[IMG]russ1[/IMG]

02-24-2005, 05:22 AM	#2
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Do you know if it's a short or long bed? __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

02-24-2005, 05:30 AM	#5
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Hey Shane been awhile, sorry I'm not good with the pics deal BUT I'm interested in the truck. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-25-2005, 12:46 AM	#7
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Hey Shane, I was bidding on that set up on ebay I think, it was a month or so ago. I'll pm you back, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-24-2005, 05:24 AM	#3
Shane's Parts Registered User Join Date: Jan 2003 Location: Kansas City, Mo Posts: 267	If someone could help me post the pics I would appreciate it. I tried several times but with no luck. I have all the pics on file, if someone could help me post them, that way everyone could see what he is selling. Thanks to whoever takes the time to help me get the pics on the thread. Shane

02-24-2005, 05:26 AM	#4
Shane's Parts Registered User Join Date: Jan 2003 Location: Kansas City, Mo Posts: 267	this is a long bed truck. Once I get the pics online everyone could see. Sorry for the delay on the pics..

02-24-2005, 08:11 PM	#6
Shane's Parts Registered User Join Date: Jan 2003 Location: Kansas City, Mo Posts: 267	Teeitup, yeah I've been really busy adding onto the house. Adding 1050 square foot. Yeah, I know quite an addition however it's needed for a growing family. I'll send you a pm. Kingsolver I'll e-mail the pics over to you. Thanks for getting them posted for me(actually I doing a favor for another guy by posting this, he couldn't figure out how to post it).

03-07-2005, 09:05 PM	#8
Shane's Parts Registered User Join Date: Jan 2003 Location: Kansas City, Mo Posts: 267	I was only posting this for a friend at work. He tried to sell it all on e-bay a month or 2 ago, but wasn't satisfied with the results. However, thanks to everyone for their interest in the truck and all the parts. -----------------------------------------------------------------------------------THE TRUCK IS NOW SOLD TO : SCJ Thanks again to everyone for their interest.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.