Center cap mounting screws - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kevinr1970 · 03-15-2005, 03:40 AM

I went by the dealer today thinking I would by a set of the screws to mount the center caps on rallye rims. I need all 12. I shied away when he quoted $4 each.
$4 EACH!!!!
Thats $48 for all 12!!!!!
We talked a little about trucks while he was looking up part #'s, he has an '85 K5 and he said that was him floating me the best deal he could as they listed for over $5 each in his catalog.
$5 EACH!!!!!!!!!!!!!
Hell, he even said I should try Lowes or Home Depot.
I guess my point is, does anyone know where they are available from for a reasonable price, or at least know what thread they are so I can source them, like 1/4-20 x 1" or 3/8-16 x 7/8" or something like that?
Also, I have seen two different types, what I know as a type "F" thread cutter and what I know as a "tri-lobular" thread forming. Either ones would work for me.

Mike76251 · 03-15-2005, 07:29 AM

That is a little high.........if they are anything like the ones on my '84 C10......you better mix up the screws (put two different head sizes with the same size threads).
Twice now somebody has tried to steal my center caps.....once at Walmart and once at Best Buy.

Prerunner1982 · 03-15-2005, 10:37 AM

Kevin, i got mine at O-reillys (or autozone or whatever parts house is in your area), they usually have a small rack or nuts and bolts and they happen to have a set of like 3 or 4 per package.. dont remember price. but certainly better than $5 each.

kevinr1970 · 03-15-2005, 12:31 PM

We have Schucks and NAPA localy. I'll give them a try if nothing else.
We also have Tacoma Screw which has pretty much everything, but I need to know the thread pitch. They are also a little pissy when you buy in small quantites, I think they are used to comercial customers ordering 1000's.

**76sierraclassic** · 03-16-2005, 12:37 AM

When I picked up my rally's they had center caps, but the bolts/screws were all mismatched. Some were the originals, some were not, and all were rusty. I know they are not "correct", but I just stopped by my local hardware store and purchased some stainless steel hex head bolts for mine. They work great and they will never rust.

Just an idea.....

Mike

03-15-2005, 03:40 AM	#1
kevinr1970 Senior Member Join Date: Aug 2004 Location: Everett, WA Posts: 2,316	Center cap mounting screws I went by the dealer today thinking I would by a set of the screws to mount the center caps on rallye rims. I need all 12. I shied away when he quoted $4 each. $4 EACH!!!! Thats $48 for all 12!!!!! We talked a little about trucks while he was looking up part #'s, he has an '85 K5 and he said that was him floating me the best deal he could as they listed for over $5 each in his catalog. $5 EACH!!!!!!!!!!!!! Hell, he even said I should try Lowes or Home Depot. I guess my point is, does anyone know where they are available from for a reasonable price, or at least know what thread they are so I can source them, like 1/4-20 x 1" or 3/8-16 x 7/8" or something like that? Also, I have seen two different types, what I know as a type "F" thread cutter and what I know as a "tri-lobular" thread forming. Either ones would work for me. __________________ 2009 Honda Fit CfC (bsf 44.9 mpg) 2000 Tahoe Limited 1991 GMC CrewCab Dually 2wd, will end up swb, not dually and replace CCswb below 1991 GMC CrewCab Dually 4x4, just going to fix things up for now 1982/1989 K5/GMC Jimmy 2wd 1987 GMC 1/2 ton swb 2wd Crew (sold)

03-15-2005, 10:37 AM	#3
Prerunner1982 Registered User Join Date: Oct 2002 Location: Edmond, OK Posts: 5,904	Kevin, i got mine at O-reillys (or autozone or whatever parts house is in your area), they usually have a small rack or nuts and bolts and they happen to have a set of like 3 or 4 per package.. dont remember price. but certainly better than $5 each. __________________ Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call

03-15-2005, 12:31 PM	#4
kevinr1970 Senior Member Join Date: Aug 2004 Location: Everett, WA Posts: 2,316	We have Schucks and NAPA localy. I'll give them a try if nothing else. We also have Tacoma Screw which has pretty much everything, but I need to know the thread pitch. They are also a little pissy when you buy in small quantites, I think they are used to comercial customers ordering 1000's. __________________ 2009 Honda Fit CfC (bsf 44.9 mpg) 2000 Tahoe Limited 1991 GMC CrewCab Dually 2wd, will end up swb, not dually and replace CCswb below 1991 GMC CrewCab Dually 4x4, just going to fix things up for now 1982/1989 K5/GMC Jimmy 2wd 1987 GMC 1/2 ton swb 2wd Crew (sold)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-15-2005, 07:29 AM	#2
Mike76251 Senior Member Join Date: Mar 2003 Posts: 2,499	That is a little high.........if they are anything like the ones on my '84 C10......you better mix up the screws (put two different head sizes with the same size threads). Twice now somebody has tried to steal my center caps.....once at Walmart and once at Best Buy.

03-16-2005, 12:37 AM	#5
76sierraclassic Senior Member Join Date: Feb 2004 Location: White Hall, AR Posts: 316	When I picked up my rally's they had center caps, but the bolts/screws were all mismatched. Some were the originals, some were not, and all were rusty. I know they are not "correct", but I just stopped by my local hardware store and purchased some stainless steel hex head bolts for mine. They work great and they will never rust. Just an idea..... Mike



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.