|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
03-20-2005, 06:11 PM
|
#1 |
|
yeller
Join Date: Oct 2001
Location: Twin Cities
Posts: 13,824
|
What did you get done this weekend?
Ken is out of town until Monday, so we will have to start without him.
What did you get done this weekend? I got my gas cap "ring" from the machine shop and got the bed floor cut to fit it. Now I need to weld it in, then get the bed to the bodyman to get stripped and worked on.
__________________
Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale |
|
|
|
03-20-2005, 07:54 PM
|
#2 |
|
Registered User
Join Date: Feb 2005
Posts: 44
|
After two weeks of reading about headrs I've ordered a 2-1/4" dual exhaust for factory manifolds. Rebuilt one of the hyd. rams on the tracktor and hired a roofer.
__________________
73 Crew Cab Dually 454 I don't need no stinking garage! 
|
|
|
|
|
03-20-2005, 09:23 PM
|
#3 |
|
Gentleman Jim Driver
Join Date: Nov 2002
Location: Poulsbo, WA
Posts: 1,553
|
I just finished up building my Wideband O2 meter. It controls a wideband O2 sensor and will assist me in getting the MegaSquirt fuel injection on my 84 perfectly dialed in. I've been driving that truck for a couple months with the EFI, so far so good!
Other than that, the power was off for 1/2 the day this morning. I realize how much I depend on electricity...
__________________
Joe '75 GMC Gentleman Jim '84 Chev C10 Short Wide - Super duper plain (manual steering, manual brakes, no dome light, no cig lighter) '85 Chev C10 Short Wide - Super plain Vortec 4.8 4L60E trans also: '81 K30, '83 C30 Crew Dually, '84 M1028 CUCV, '85 M1009 CUCV, another '85 C10 SWB, '89 R3500 Flatbed Last edited by ElGracho; 03-20-2005 at 09:25 PM. |
|
|
|
|
03-20-2005, 09:27 PM
|
#4 |
|
Registered User
Join Date: Feb 2003
Location: Midwest City, OK
Posts: 1,001
|
Coached my daughter in a t-ball tourney all weekend. We just got home, so not much got done on the truck..
__________________
Robert Current: 1986 SWB Silverado 4.3 / TH400 Past: 1985 SWB Silverado 305 / TH350 - sold 1995 1987 1/2 ton Silverado - FI 350 / 700R4 sold 2007 |
|
|
|
|
03-20-2005, 10:21 PM
|
#5 |
|
Active Member
Join Date: Nov 2003
Location: Jacksonville, FL
Posts: 307
|
Went to Gatornationals on Friday, Savannah on Saturday and spent Sunday recovering...
 Oh yeah...and finally got some pics of the truck.. 
__________________
D.M.C -FF- |
|
|
|
|
03-20-2005, 10:24 PM
|
#6 | |
|
Active Member
Join Date: Nov 2003
Location: Jacksonville, FL
Posts: 307
|
Quote:
That looks NICE!!! Would you mind telling me where you got the gas cap? I've been looking for one!
__________________
D.M.C -FF- |
|
|
|
|
|
03-20-2005, 10:37 PM
|
#7 | |
|
yeller
Join Date: Oct 2001
Location: Twin Cities
Posts: 13,824
|
Quote:
__________________
Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale |
|
|
|
|
|
03-20-2005, 10:46 PM
|
#8 | |
|
Active Member
Join Date: Nov 2003
Location: Jacksonville, FL
Posts: 307
|
Quote:
__________________
D.M.C -FF- |
|
|
|
|
|
03-21-2005, 12:03 AM
|
#9 |
|
Robert Olson Transport
 
Join Date: Oct 2002
Location: recent transplant to NC USA
Posts: 20,310
|
well the truck is in my friends shop. i got the th400 from the junkyard and the dern thing was wrong i got the short tail and i need a long tail So mondya its back to the yard to find a good longtail if they have it while i get this one rebuilt for eventual re install..... the other big deal was i found my flex plate was broken so we got that replaced with a new one. hopefully ill have the truck running in a day or so then i can fool around with the interior
__________________
Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!! |
|
|
|
|
03-21-2005, 12:05 AM
|
#10 |
|
Registered User
Join Date: May 2004
Location: Lubbock, Texas
Posts: 2,121
|
Spring brake, nothing.
__________________
'96 Nissan Pathfinder '02 Firebird Trans Am. '88 K5 Blazer |
|
|
|
|
03-21-2005, 12:14 AM
|
#11 |
|
Registered User
 Join Date: Jul 2003
Location: Franklin, NE
Posts: 387
|
Went to an auction and bought a 79 Chevy Cheyenne 1/2 ton, 6 cylinder, air, power steering & brakes, ralleys for $225.00. It is fairly straight & rust free for a farm truck. Very little rust, hood gashed in front, and wasn't bent until the action. It doesn't run but my uncle and I are thinking its because ace mechanic rebuilt the carb wrong. Runs when you pour gas in the carb. I was going to use it as a body for my 78 K-10, but I don't know now as it is pretty clean.
|
|
|
|
|
03-21-2005, 01:02 AM
|
#12 |
|
ureckmefixit2@cox.net
Join Date: Dec 2004
Location: Mesa AZ. (Phoenix)
Posts: 1,284
|
Well I'v ben painting a chevy bed. ( Mine ).
|
|
|
|
|
03-21-2005, 10:59 AM
|
#13 |
|
Insert Witty Text Here
Join Date: Oct 2002
Location: San Antonio, TX
Posts: 3,415
|
I spent Friday getting my father's old '37 Chevy Coupe back on the road. He was sick for a while before he died, so the inspection expired 2 or 3 years ago. When I got to the place that does my inspections, they had used their last sticker 15 minutes before I got there. I took the day off to get it done, so that was pretty disappointing.
I just drove it home and gave it the first washing it has had in about 5 years. It is depressing to see how far the car deteriorated while sitting in the driveway not being driven.Saturday I spent the whole day cleaning out my father's garage. This is the fourth time I have spent a full day in there, and I am probably only about 10% of the way through it. It is a two car garage, and it is so full that most people who go in there do not realize that there is a car in there (1973 BMW 2002 that he bought in 1974). One day, after I finish in there, I get to do the attic and a 10X12 storage shed. Sunday was spent pulling the transmission in my truck. I have been chasing leaks around it the whole time I have had it. I'm just going to have the whole thing rebuilt so that I can quit messing with it. The rest of the day was spent visiting some friends who just had their first baby. She is 6 months old, and we had not seen her yet. My hands smelled like transmission fluid, even after showereing, and the baby was fascinated with my hands. I guess she liked the smell. Weird...  Slonaker |
|
|
|
|
03-21-2005, 12:27 PM
|
#14 |
|
Registered User
Join Date: Jan 2003
Location: Austin, TX
Posts: 824
|
I got me a new truck!!
I will try to get some pics of it to post up.
|
|
|
|
|
03-21-2005, 02:21 PM
|
#15 |
|
Registered User
Join Date: Mar 2005
Location: Fort Wayne, IN
Posts: 68
|
well I went to a new jinkyard (new to me) and I found a cherry 90 K5. So pulled the entire radiator support, grille and wiring off to put on my 85. $100 and a lot of work, body mounts suck. I am going to go back and get some more. Has a cherry grey dash if anyone needs.
I dissasmbled an S&S drivetrain I had laying around. Cleaned out the garage. Took the wife and kid out, blah blah |
|
|
|
|
03-21-2005, 02:35 PM
|
#16 |
|
Mudslides 'r my specialty
Join Date: Dec 2003
Location: STL
Posts: 1,106
|
$100 is pretty cheap...good find.
Oh, we got wheels and tires on my buddy's 50 F*rd.
__________________
Always on the lookout for old cars and parts...(20s, 30s, 40s, 50s, 60s, etc.) http://www.cardomain.com/memberpage/500339 Last edited by 8t5Silverado; 03-21-2005 at 02:41 PM. |
|
|
|
|
03-21-2005, 02:50 PM
|
#17 |
|
Registered User
Join Date: Mar 2005
Location: Fort Wayne, IN
Posts: 68
|
Them must of been some stubborn lug nuts for it to take all weekend! :-)
|
|
|
|
|
03-21-2005, 03:10 PM
|
#18 |
|
Slots go on anything!
Join Date: May 2003
Location: Richardson, TX
Posts: 5,957
|
I need the dash, if you can get it.
I got up early Saturday, and picked up a 74 Custom Deluxe that I bought earlier in the week. The truck had a loud knock, so we decided to put in the 327 I had in the garage. Picking the truck up, we were rewarded with a relatively straight, one owner, original paint, 135K mile truck. It must not have liked the idea of giving up the original engine, because it fought the whole way. After staying up until 4 AM Saturday night (Sunday?), we got it finished Sunday afternoon. The truck turned out pretty nice. I think it has a new home already as well.
__________________
1974 Jimmy- 5.3/4L80e/NP241 |
|
|
|
|
03-21-2005, 03:59 PM
|
#19 |
|
Registered User
Join Date: Oct 2003
Location: Chesapeake, VA
Posts: 734
|
Put my reworked driveshaft in Friday night- no vibration now!
 Sat.- went fishing w/ the dog out on the boat. AWESOME! Great weather, finally calibrated the compass I installed last year. No fish, though... Today- had the A/C checked out and a new fill plug installed in the rear end. The old one would not come out for me, not even with the smoke wrench and lots of PB Blaster...
__________________
Semper Paratus |
|
|
|
|
03-21-2005, 04:48 PM
|
#20 |
|
Registered User
Join Date: Mar 2005
Location: Fort Wayne, IN
Posts: 68
|
How much do you want to pay for the dash cover? I am going back saturday with a buddy as he wants some stuff for his jeep. Speaking of Jeeps, I saw an idential jeep to mine, same color and all... well except it was right hand drive with american guages.. who would have known?
|
|
|
|
|
03-21-2005, 04:56 PM
|
#21 |
|
Foom, foom, foom!
Join Date: Mar 2005
Location: Abilene, TX
Posts: 106
|
Well I can't get much done because of the fact that I'm not with my truck but I did you a little parts buying......Flowtech Afterburner Headers.
 And a 3.73 ring and pinion set...  I cannot wait to get them installed...
__________________
- Dan 84' LWB C10 // 2.5" from collector back. duel Turbo Mufflers // 350 w/ TH350 long Headers//3.73 rearend gears Future Mods 3/4 suspension drop
|
|
|
|
|
03-21-2005, 06:32 PM
|
#22 | |
|
Slots go on anything!
Join Date: May 2003
Location: Richardson, TX
Posts: 5,957
|
Quote:
__________________
1974 Jimmy- 5.3/4L80e/NP241 |
|
|
|
|
|
03-21-2005, 06:51 PM
|
#23 |
|
Chevys Kick A$$
Join Date: Jan 2005
Location: Zootown, MT
Posts: 12,699
|
Changed the oil in my '79 and spent saturday night with a couple good buddies sitting around drinking and celebrating his birthday. Got my '88 ready to put the 350 SB in, just waiting for next paycheck to get a couple of more things and it should be up and running pretty soon. Layed around for the rest of the weekend.
-Later
__________________
*HOODS is what I answer too* -'79, '77, '88 Pickup Sold, '85 Camaro, '83 T/A, '81,'83,'90 K5 Blazer All Sold  -'79 3/4 ton "Big Yellow Bananna" Lifted 4spd. 39.5 TSL Swampers, The money Pit  -'86 K5 Blazer Silverado 6.2 4" lift 35"s -'95 Ext. Cab Shorty 4" Tuff Country rolling 35" M/T's -'83 Monte Carlo T-Tops. 126,500 Original Miles -LATER  I would rather push a Chevy then drive a ford!!
 |
|
|
|
|
03-21-2005, 11:09 PM
|
#24 |
|
Registered User
Join Date: Mar 2005
Location: Fort Wayne, IN
Posts: 68
|
well I plan on buying a lot off the blazer, so I think I can get the dash for $100. It looked perfect to me. I will take a real good look saturday when I go back up. I am going to pull the guage cluster anyway, so the dash cover will have to come off.
|
|
|
|
|
03-21-2005, 11:27 PM
|
#25 |
|
Registered User
Join Date: May 2003
Location: Lake Oswego, Oregon
Posts: 1,028
|
got some (new) seats for the truck
__________________
Ken Morgan For fun: 1964 Volvo 122 For slow: 1984 Chevrolet C-10 For everything else: 1997 BMW M3 |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
