HELP I NEED c50 FRONT FENDERS ASAP...can you help me? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

T.Matthews · 03-17-2005, 08:41 AM

I'm trying to get my dump truck painted and need front fenders. Dos anyone know where to get them?I have been searching for 3 months now and have found nothing.

Thanks,

Tom

69 Short Fleet · 03-17-2005, 12:23 PM

Not sure, good question. Are the orig. steel or glass.

68gmcdually · 03-17-2005, 03:35 PM

I have a pair, only problem is that I am from Canada.

T.Matthews · 03-17-2005, 09:06 PM

What's the problem? How much and how good a condition are they?

Thanks,

Tom

68gmcdually · 03-18-2005, 10:46 AM

I will get some pictures today or tomorrow for ya.

T.Matthews · 03-18-2005, 12:31 PM

That would be awesome............ where abouts in Canada are you. Is it close enough to Vermont for a road trip?

Thanks again,

Tom

68gmcdually · 03-18-2005, 01:41 PM

I am actually about 3 hours away from the Gananoque crossing. However I am going to Belleville, ON next week sometime if your interested, Knocks about 2 hours off each way. The wife would probably like me to deliver them to Vermont, she loves it there.

T.Matthews · 03-18-2005, 03:50 PM

OK I just wait to see the pictures and what you want for them.

68gmcdually · 03-18-2005, 04:48 PM

I just came from the shop and it appears as though somebody may have hit the one fender with the snowplow and the other one is missing. I am going to check with a local guy here who had a virtually N.O.S. one last time I spoke with him.

68gmcdually · 03-18-2005, 04:54 PM

Yup he still has it, described it to me as brand new drivers side, off of a GMC 950. No price though, had to check with someone else first. My passenger side one is the only one left so out of the two you might be able to make a good pair. I will try and get some pics though.

T.Matthews · 03-18-2005, 08:02 PM

Thank you please let me know.

Tom

T.Matthews · 03-22-2005, 09:18 PM

Anyone else have anything?

Tom

T.Matthews · 03-27-2005, 08:49 PM

anyone...................................

68gmcdually · 03-27-2005, 11:03 PM

Sorry for the extreme delay, I was supposed to go on a parts run on Saturday but didn't make it. I was hoping to find you something while on it. Keep me posted if you still require them later on in the week and I will do my best to source you some. The one I had is pretty battered up, it got bent up from the snowplow 2 weeks ago.

T.Matthews · 03-28-2005, 09:45 PM

Yes I still need them.

Thanks,

Tom

T.Matthews · 04-01-2005, 02:38 PM

now that the snow has started to melt has anyone seen any of these parts?

03-17-2005, 08:41 AM	#1
T.Matthews Registered User Join Date: Feb 2005 Location: Dunstable, MA Posts: 60	HELP I NEED c50 FRONT FENDERS ASAP...can you help me? I'm trying to get my dump truck painted and need front fenders. Dos anyone know where to get them?I have been searching for 3 months now and have found nothing. Thanks, Tom

03-17-2005, 03:35 PM	#3
68gmcdually Registered User Join Date: Feb 2004 Location: Fenelon Falls, ON Canada Posts: 1,454	I have a pair, only problem is that I am from Canada. __________________ James Bellwood 1968 930 Extend-A-Cab Dually 5.7l, 5 speed,

03-18-2005, 10:46 AM	#5
68gmcdually Registered User Join Date: Feb 2004 Location: Fenelon Falls, ON Canada Posts: 1,454	I will get some pictures today or tomorrow for ya. __________________ James Bellwood 1968 930 Extend-A-Cab Dually 5.7l, 5 speed,

03-18-2005, 01:41 PM	#7
68gmcdually Registered User Join Date: Feb 2004 Location: Fenelon Falls, ON Canada Posts: 1,454	I am actually about 3 hours away from the Gananoque crossing. However I am going to Belleville, ON next week sometime if your interested, Knocks about 2 hours off each way. The wife would probably like me to deliver them to Vermont, she loves it there. __________________ James Bellwood 1968 930 Extend-A-Cab Dually 5.7l, 5 speed,

03-18-2005, 04:48 PM	#9
68gmcdually Registered User Join Date: Feb 2004 Location: Fenelon Falls, ON Canada Posts: 1,454	I just came from the shop and it appears as though somebody may have hit the one fender with the snowplow and the other one is missing. I am going to check with a local guy here who had a virtually N.O.S. one last time I spoke with him. __________________ James Bellwood 1968 930 Extend-A-Cab Dually 5.7l, 5 speed,

03-17-2005, 12:23 PM	#2
69 Short Fleet Registered User Join Date: Nov 2002 Location: Kelowna B.C. Canada Posts: 1,086	Not sure, good question. Are the orig. steel or glass.

03-17-2005, 09:06 PM	#4
T.Matthews Registered User Join Date: Feb 2005 Location: Dunstable, MA Posts: 60	What's the problem? How much and how good a condition are they? Thanks, Tom

03-18-2005, 12:31 PM	#6
T.Matthews Registered User Join Date: Feb 2005 Location: Dunstable, MA Posts: 60	That would be awesome............ where abouts in Canada are you. Is it close enough to Vermont for a road trip? Thanks again, Tom

03-18-2005, 03:50 PM	#8
T.Matthews Registered User Join Date: Feb 2005 Location: Dunstable, MA Posts: 60	OK I just wait to see the pictures and what you want for them.

03-18-2005, 04:54 PM	#10
68gmcdually Registered User Join Date: Feb 2004 Location: Fenelon Falls, ON Canada Posts: 1,454	Yup he still has it, described it to me as brand new drivers side, off of a GMC 950. No price though, had to check with someone else first. My passenger side one is the only one left so out of the two you might be able to make a good pair. I will try and get some pics though. __________________ James Bellwood 1968 930 Extend-A-Cab Dually 5.7l, 5 speed,

03-18-2005, 08:02 PM	#11
T.Matthews Registered User Join Date: Feb 2005 Location: Dunstable, MA Posts: 60	Thank you please let me know. Tom

03-22-2005, 09:18 PM	#12
T.Matthews Registered User Join Date: Feb 2005 Location: Dunstable, MA Posts: 60	Anyone else have anything? Tom

03-27-2005, 08:49 PM	#13
T.Matthews Registered User Join Date: Feb 2005 Location: Dunstable, MA Posts: 60	anyone...................................

03-27-2005, 11:03 PM	#14
68gmcdually Registered User Join Date: Feb 2004 Location: Fenelon Falls, ON Canada Posts: 1,454	Sorry for the extreme delay, I was supposed to go on a parts run on Saturday but didn't make it. I was hoping to find you something while on it. Keep me posted if you still require them later on in the week and I will do my best to source you some. The one I had is pretty battered up, it got bent up from the snowplow 2 weeks ago. __________________ James Bellwood 1968 930 Extend-A-Cab Dually 5.7l, 5 speed,

03-28-2005, 09:45 PM	#15
T.Matthews Registered User Join Date: Feb 2005 Location: Dunstable, MA Posts: 60	Yes I still need them. Thanks, Tom



Register or Log In To remove these advertisements.

04-01-2005, 02:38 PM	#16
T.Matthews Registered User Join Date: Feb 2005 Location: Dunstable, MA Posts: 60	now that the snow has started to melt has anyone seen any of these parts?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.