How much are these worth, OE hatch holder uppers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Gyva · 04-24-2005, 06:59 PM

Just curious about the value on a good set of these. What wold one expect to pay for a good working unbent set? thanks.

Mike...

wingman · 04-24-2005, 07:05 PM

Are they the hatch slides or the mounting hardware or the whole setup? Pics would help.

Gyva · 04-24-2005, 07:07 PM

Just 2 pieces that hold up the hatch, I guess the sliders

Gyva · 04-24-2005, 11:58 PM

anybody know if they are a rare find? if not worth? thanks

Mike

BobbyK · 04-25-2005, 01:36 AM

20-25 bucks

RED72blazer · 04-25-2005, 04:19 AM

are they off of a single or double wall top? if they are of a double I may be interested

BobbyK · 04-25-2005, 05:37 AM

Single and double walled tops use the same supports.

wingman · 04-25-2005, 08:44 AM

If they are the slides I may be interested also, now if only someone else here had the mounts.....

RED72blazer · 04-25-2005, 01:26 PM

then how come my slides that are off of a single wall don't fit my double wall?

Gyva · 04-25-2005, 01:43 PM

how do you tell double wall from single... still confused on that

yes they are the 2 slides that lock then release, on each side of the slide is a 2 bolt mount which swivels. I only got one if front of me now and the only writing is a N inside a circle on one of the mounts

teamradrz1 · 04-26-2005, 03:06 AM

double wall you bolt on from under the bed side, single wall you bolt from top side down (thin)

HatGuy · 04-26-2005, 05:22 AM

I want them if they are for single wall top
20.00+ shipping to 76102 OK?
PM Me

junkyardjohn · 04-28-2005, 11:50 AM

THE THE LAST PAIR I HAD WENT FOR $72 ON EBAY.

JOHN

Gyva · 04-28-2005, 01:29 PM

I'm thinkin I'll try my luck there as well.... thanks John...

70rs/ss · 04-28-2005, 04:54 PM

Are you serious? I know where a couple of pairs are, I need to go get them and ebay here we come! I need a 350 engine kit so if they are worth that much I should be able to buy one. They are the same for the blazer and sub too, right?

71jimmy · 04-28-2005, 06:37 PM

Quote:

Originally Posted by 70rs/ss

They are the same for the blazer and sub too, right?

Don't think so.

71jimmy · 04-29-2005, 01:22 AM

These just posted on ebay:

http://cgi.ebay.com/ebaymotors/ws/eB...546545485&rd=1
Let's see how much they go for.

70rs/ss · 04-29-2005, 01:56 AM

Quote:

Originally Posted by 71jimmy

Don't think so.

Anyone else know about this or have input? I thought the Blazer and sub hatch brackets were the same. I have both, I guess I could take one off and compare. If anyone else has an idea?

71jimmy · 04-29-2005, 11:12 AM

Nope, I tried the ones from a Sub and they were like 2" short, if I remember correctly. They look identical, luckily I was able to get my money back.

Gyva · 05-01-2005, 11:17 PM

Up to $51.00 about 4 days left..... I bet it breaks a hundred

Mike....

71jimmy · 05-02-2005, 01:19 AM

If they break a hundered, I have a pair for sale!!!!!!!!!!

Rod · 05-02-2005, 09:29 AM

Me 3

*bisquik65* · 05-02-2005, 11:24 AM

Quote:

Originally Posted by 71jimmy

These just posted on ebay:

http://cgi.ebay.com/ebaymotors/ws/eB...546545485&rd=1
Let's see how much they go for.

Do you all see that member on ebay name is..LS665BIS guess what that is me Bisquik65 Thats all my stuff!!! After all a have a LS6 454 in my 65 biscayne

I may have more blazer stuff ,hehehehe

*bisquik65* · 05-03-2005, 01:52 PM

bump

Gyva · 05-05-2005, 07:57 PM

I was wrong they sold for $51.00 not bad....

04-24-2005, 06:59 PM	#1
Gyva Registered User Join Date: Jan 2005 Location: Mountain Home Idaho Posts: 544	How much are these worth, OE hatch holder uppers Just curious about the value on a good set of these. What wold one expect to pay for a good working unbent set? thanks. Mike...

04-25-2005, 01:36 AM	#5
BobbyK Registered User Join Date: May 2000 Location: Petrolia,Ontario,Canada but working in Port Huron,Mi. Posts: 1,772	20-25 bucks __________________ 71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE

04-25-2005, 04:19 AM	#6
RED72blazer urban fourwheelin Join Date: Aug 2002 Location: Seattle Posts: 1,007	are they off of a single or double wall top? if they are of a double I may be interested __________________ 1972 K5 Blazer with Cummins 4BT, NV4500 swap in the parts gathering stage.

04-25-2005, 05:37 AM	#7
BobbyK Registered User Join Date: May 2000 Location: Petrolia,Ontario,Canada but working in Port Huron,Mi. Posts: 1,772	Single and double walled tops use the same supports. __________________ 71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE

04-25-2005, 01:26 PM	#9
RED72blazer urban fourwheelin Join Date: Aug 2002 Location: Seattle Posts: 1,007	then how come my slides that are off of a single wall don't fit my double wall? __________________ 1972 K5 Blazer with Cummins 4BT, NV4500 swap in the parts gathering stage.

04-24-2005, 07:05 PM	#2
wingman Registered User Join Date: Apr 2005 Posts: 41	Are they the hatch slides or the mounting hardware or the whole setup? Pics would help.

04-24-2005, 07:07 PM	#3
Gyva Registered User Join Date: Jan 2005 Location: Mountain Home Idaho Posts: 544	Just 2 pieces that hold up the hatch, I guess the sliders

04-24-2005, 11:58 PM	#4
Gyva Registered User Join Date: Jan 2005 Location: Mountain Home Idaho Posts: 544	anybody know if they are a rare find? if not worth? thanks Mike

04-25-2005, 08:44 AM	#8
wingman Registered User Join Date: Apr 2005 Posts: 41	If they are the slides I may be interested also, now if only someone else here had the mounts.....

04-25-2005, 01:43 PM	#10
Gyva Registered User Join Date: Jan 2005 Location: Mountain Home Idaho Posts: 544	how do you tell double wall from single... still confused on that yes they are the 2 slides that lock then release, on each side of the slide is a 2 bolt mount which swivels. I only got one if front of me now and the only writing is a N inside a circle on one of the mounts

04-26-2005, 03:06 AM	#11
teamradrz1 Registered User Join Date: Apr 2005 Location: Gresham, OR 97080 Posts: 499	double wall you bolt on from under the bed side, single wall you bolt from top side down (thin) __________________ 1971 Chevy Blazer CST 4X4 2012 Camaro 2SS/RS 2007 Avalanche 4X4

04-26-2005, 05:22 AM	#12
HatGuy Registered User Join Date: Aug 2003 Location: Fort Worth Texas Posts: 275	I want them if they are for single wall top 20.00+ shipping to 76102 OK? PM Me __________________ Joe Peters the HatGuy 72' K5 Highlander My Daily Driver http://www.pbhats.com/BLAZER/index.html

04-28-2005, 11:50 AM	#13
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,425	THE THE LAST PAIR I HAD WENT FOR $72 ON EBAY. JOHN __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

04-28-2005, 01:29 PM	#14
Gyva Registered User Join Date: Jan 2005 Location: Mountain Home Idaho Posts: 544	I'm thinkin I'll try my luck there as well.... thanks John...

04-28-2005, 04:54 PM	#15
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,270	Are you serious? I know where a couple of pairs are, I need to go get them and ebay here we come! I need a 350 engine kit so if they are worth that much I should be able to buy one. They are the same for the blazer and sub too, right?



Register or Log In To remove these advertisements.

04-29-2005, 01:22 AM	#17
71jimmy Registered User Join Date: Mar 2004 Location: Sacramento, CA Posts: 1,083	These just posted on ebay: http://cgi.ebay.com/ebaymotors/ws/eB...546545485&rd=1 Let's see how much they go for. __________________ '71 Jimmy, 350, SM465, NP205, 2in Tuff Country lift, 33s on rallies, TBI, softtop and hardtop "If life was fair you'd be able to afford one of each and a garage large enough to house them all."

04-29-2005, 11:12 AM	#19
71jimmy Registered User Join Date: Mar 2004 Location: Sacramento, CA Posts: 1,083	Nope, I tried the ones from a Sub and they were like 2" short, if I remember correctly. They look identical, luckily I was able to get my money back. __________________ '71 Jimmy, 350, SM465, NP205, 2in Tuff Country lift, 33s on rallies, TBI, softtop and hardtop "If life was fair you'd be able to afford one of each and a garage large enough to house them all."

05-01-2005, 11:17 PM	#20
Gyva Registered User Join Date: Jan 2005 Location: Mountain Home Idaho Posts: 544	Up to $51.00 about 4 days left..... I bet it breaks a hundred Mike....

05-02-2005, 01:19 AM	#21
71jimmy Registered User Join Date: Mar 2004 Location: Sacramento, CA Posts: 1,083	If they break a hundered, I have a pair for sale!!!!!!!!!! __________________ '71 Jimmy, 350, SM465, NP205, 2in Tuff Country lift, 33s on rallies, TBI, softtop and hardtop "If life was fair you'd be able to afford one of each and a garage large enough to house them all."

05-02-2005, 09:29 AM	#22
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	Me 3

05-03-2005, 01:52 PM	#24
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	bump

05-05-2005, 07:57 PM	#25
Gyva Registered User Join Date: Jan 2005 Location: Mountain Home Idaho Posts: 544	I was wrong they sold for $51.00 not bad....

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.