The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-23-2005, 01:26 PM   #1
crawdad
Senior Member
 
crawdad's Avatar
 
Join Date: Sep 2004
Location: Georgia
Posts: 614
Running quiet muffler W/ Headers

I want to keep the headers that were already on my truck when I got it, but I also want some quiet (real quiet) mufflers. I know that performance would suffer with this combination, but would driveability also be hurt, or would the back pressure be so bad that it might somehow hurt the engine? Thanks for your input.
__________________

2012 Silverado LT 1500, 5.3, 6 speed auto
'86 SWB C-10 Silverado
crawdad is offline   Reply With Quote
Old 05-23-2005, 02:00 PM   #2
Russell
Professional Grade
 
Russell's Avatar
 
Join Date: May 2003
Location: Fort McMurray, Alberta
Posts: 7,915
Maybe try a muffler from a newer truck, like one of the 6 litres? They are pretty quiet mufflers, and probally would not affect your performance much. Only issue with that idea is that you'd need to go with a single exhaust setup, as if I remember right, those mufflers are real big.
__________________
1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)
Russell is offline   Reply With Quote
Old 05-23-2005, 03:02 PM   #3
bodydropped
Registered User
 
Join Date: Jan 2005
Location: beaumont,tx
Posts: 757
yea only draw back to newer stuff is that they restrict flow go buy some cheap mufflers like turbo or some off the wall brand
bodydropped is offline   Reply With Quote
Old 05-23-2005, 03:57 PM   #4
1974gmc
In Progress
 
1974gmc's Avatar
 
Join Date: Feb 2005
Location: Kamloops, BC, Canada
Posts: 312
im running headers with turbo mufflers and they are still loud. what about a stock muffler?
__________________
1993 Chevrolet K2500 454 4L80E
1974 GMC 1/2t 2wd Stepside 305 auto *sold*
1985 Ford Mustang GT 5.0 5spd
1974gmc is offline   Reply With Quote
Old 05-23-2005, 04:24 PM   #5
Hoods69BadBowTie
Chevys Kick A$$
 
Hoods69BadBowTie's Avatar
 
Join Date: Jan 2005
Location: Zootown, MT
Posts: 12,699
I would say try running some cheap mufflers that are still decent but that are not made to be loud at all. Not quite sure of any brands to reccommend though.
-Later
__________________
*HOODS is what I answer too*
-'79, '77, '88 Pickup Sold, '85 Camaro, '83 T/A, '81,'83,'90 K5 Blazer All Sold
-'79 3/4 ton "Big Yellow Bananna" Lifted 4spd. 39.5 TSL Swampers, The money Pit
-'86 K5 Blazer Silverado 6.2 4" lift 35"s
-'95 Ext. Cab Shorty 4" Tuff Country rolling 35" M/T's
-'83 Monte Carlo T-Tops. 126,500 Original Miles
-LATER
I would rather push a Chevy then drive a ford!!
Hoods69BadBowTie is offline   Reply With Quote
Old 05-23-2005, 10:06 PM   #6
cochran63
Registered User
 
cochran63's Avatar
 
Join Date: Jan 2004
Location: Oklahoma
Posts: 1,057
I have borlas on my 00 gmc. It is only a hair louder than stock and definatly has a mean growl when accelerating.
__________________
Youth soon passes away, but immaturity can last a life time.
cochran63 is offline   Reply With Quote
Old 05-23-2005, 10:44 PM   #7
K Dubb
www.Dubbmotorsports.com
 
K Dubb's Avatar
 
Join Date: Jul 2004
Location: Michigan
Posts: 110
I have headers with with with 2 1/2 all the way back with flows.... Big block really makes some noise....try getting a cat.
__________________
DubbMotorSports Edition
K Dubb is offline   Reply With Quote
Old 05-23-2005, 11:13 PM   #8
CT-Truckster
?
 
CT-Truckster's Avatar
 
Join Date: Jul 2002
Location: Dyersburg, TN
Posts: 471
I talked to a guy at a local muffler shop telling him I wanted my truck really quiet to hide any hint of a powerful engine and not affect performance to much with restrictive exhaust and he suggested to put glasspacks in front of the mufflers, and that will quieten it down some more. Anybody ever heard of or done this?
CT-Truckster is offline   Reply With Quote
Old 05-23-2005, 11:18 PM   #9
SanitysBane
Registered User
 
Join Date: May 2004
Location: Lubbock, Texas
Posts: 2,121
I think running open headers is perfect...
__________________
'96 Nissan Pathfinder
'02 Firebird Trans Am.
'88 K5 Blazer
SanitysBane is offline   Reply With Quote
Old 05-24-2005, 01:07 AM   #10
jermasaurus
Registered User
 
jermasaurus's Avatar
 
Join Date: Dec 2004
Location: New Lenox, IL
Posts: 442
Quote:
Originally Posted by CT-Truckster
I talked to a guy at a local muffler shop telling him I wanted my truck really quiet to hide any hint of a powerful engine and not affect performance to much with restrictive exhaust and he suggested to put glasspacks in front of the mufflers, and that will quieten it down some more. Anybody ever heard of or done this?
How can you go wrong there? As long as it flows nice.
I think I have seen that in an exhaust catalog for factory replacement on some car.
jermasaurus is offline   Reply With Quote
Old 05-24-2005, 01:40 AM   #11
Tom
driving is in my blood
 
Tom's Avatar
 
Join Date: Dec 1999
Location: Mesa AZ
Posts: 5,748
Putting a cat in the exhaust dosen't quiet it down much if any. My 2"ramhorns/ 2.5" cats/ 40 series flows were still loud as heck. If you want quiet you need stock mufflers. Yes power will suffer some but it wont hurt anything. A small glasspack in front of somthing like a borla or quieter flowmaster might be ok though, its a good idea.
__________________
-78 c10 short/step: 388cid, M20, 5/5 drop, lots more. Playtoy and first vehicle.
-98 c1500 x-cab: 5.7L, 17" rims, 5/6 drop, flowmaster, helper bags,NBS rear disk brakes.
-02 Suburban 4x4: leveled front
-CBR600F4i, CBR600RR, CBR1000RR, and standup skis
DISCLAIMER: I cant spell for the life of me.
Tom is offline   Reply With Quote
Old 05-24-2005, 08:07 AM   #12
454HO
Registered User
 
Join Date: Apr 2005
Location: Austin, TX
Posts: 1,223
Crawdad, does the truck already have an H-pipe or X-pipe? If not, adding one should help a little. Also, where do the exhaust tips exit from under the truck?

Glasspacks would definately take some of the harshness out, similar to a resonator. But I would put them after the muffler, not in front. Heat is what breaksdown the fiberglass, so the farther back in the system they are, the longer they will last.
__________________
- Greg
454HO is offline   Reply With Quote
Old 05-24-2005, 09:06 AM   #13
Brad_Olson
Active Member
 
Brad_Olson's Avatar
 
Join Date: Mar 2005
Location: Stoughton, WI
Posts: 187
What kind of system's currently on your truck?

I have a number of friends who swear by Dynomax Super Turbos as a good combination of noise level, sound quality, and performance. If you can put the mufflers farther back you can neck down the tailpipes to 2-1/4" and that may help as well.

Brad
Brad_Olson is offline   Reply With Quote
Old 05-24-2005, 11:26 AM   #14
crawdad
Senior Member
 
crawdad's Avatar
 
Join Date: Sep 2004
Location: Georgia
Posts: 614
No H pipe, and they don't exit. Well, the pipes don't extend out the truck bottom. They just point down just in front of the wheels.
__________________

2012 Silverado LT 1500, 5.3, 6 speed auto
'86 SWB C-10 Silverado
crawdad is offline   Reply With Quote
Old 05-24-2005, 12:48 PM   #15
JustOneTruck
Registered User
 
JustOneTruck's Avatar
 
Join Date: Feb 2005
Posts: 88
Do you want to hear samples .....Flow master has a place {web} to hear dif types of mufflers as well as engine set ups ford ,chevy . Under the features on the left .Ill try linking you here --- copy and paste this ---or click on below link .


http://www.flowmastermufflers.com/cg...ml?id=CCwYxooz

Last edited by JustOneTruck; 05-24-2005 at 12:49 PM.
JustOneTruck is offline   Reply With Quote
Old 05-24-2005, 03:54 PM   #16
454HO
Registered User
 
Join Date: Apr 2005
Location: Austin, TX
Posts: 1,223
Quote:
Originally Posted by crawdad
No H pipe, and they don't exit. Well, the pipes don't extend out the truck bottom. They just point down just in front of the wheels.
So are you mainly wanting to quiet down the sound you hear in the cab, or do you want to quiet down what other motorists around you hear?

An H-pipe would help even out the exhaust pulses. I have seen quotes range from $20 to $45 to have a H-pipe installed at a muffler shop. But I think the bigger problem is the turn downs under the truck. That can, and will, cause the whole truck to resonate at certain frequencies and actually amplify the sound. If you were to add some tailpipes to go over the axle and either exit under the rear bumper, or to each side behind the wheel, it would make it much quieter inside the cab.
__________________
- Greg
454HO is offline   Reply With Quote
Old 05-24-2005, 05:05 PM   #17
Captkaos
www.73-87chevytrucks.com
 
Captkaos's Avatar
 
Join Date: Dec 1999
Location: Birmingham, AL
Posts: 6,935
If you exit it out in front of the rear tires it will be louder than running it out the back. As for Quiet mufflers, I suggest Dynomax Super Turbo's. The are not that loud and don't hurt flow. If you are wanting quiet, I wouldn't go with glasspacks.

You can hear them here:
http://www.dynomax.com/sounds.stm
__________________
Chris Lucas
1973 Chevy C-10
1978 GMC Jimmy (2WD) - SOLD
1987 R10 twin turbo LS
1991 R3500 SRW CrewCab
1985 K5 diesel swapped project
1989 K5 2WD conversion w/ Vette susp Project
Captkaos Customs
73-87chevytrucks.com
Captkaos is offline   Reply With Quote
Old 05-24-2005, 08:24 PM   #18
crawdad
Senior Member
 
crawdad's Avatar
 
Join Date: Sep 2004
Location: Georgia
Posts: 614
My objective is to quiet down the entire system both to myself in the cab and to my neighbors. The mufflers/tailpipes that are on there now were just thrown together from pieces by my nephew and his teenage friend. They are so loud, they purely hurt your ears. I'm tearing out everything except for the mufflers and plan to put in new mufflers (brand ?), and new tailpipes straight out the back. I've got a muffler shop ready to do it for me. I'm just trying to decide which brand to go with that will give me (1) a fairly free-flowing system, and (2) a quiet system. I don't mind a little throaty rumble as long as it doesn't sound like a Harley with straight pipes when I accelerate. BTW, the Dynomax sounds pretty good.
__________________

2012 Silverado LT 1500, 5.3, 6 speed auto
'86 SWB C-10 Silverado

Last edited by crawdad; 05-24-2005 at 08:29 PM.
crawdad is offline   Reply With Quote
Old 05-24-2005, 09:40 PM   #19
Paso76GMCstepper
Registered User
 
Paso76GMCstepper's Avatar
 
Join Date: Jan 2004
Location: Paso Robles, CA
Posts: 347
Flowtech Turbos or something like that from Kragen 20 bucks a piece. Nice sound on my truck with headers
__________________
Tony



"Life is a Team Sport"

To the memory of the Hendrick Motorsports Plane Crash Victims
Paso76GMCstepper is offline   Reply With Quote
Old 05-25-2005, 12:16 AM   #20
crawdad
Senior Member
 
crawdad's Avatar
 
Join Date: Sep 2004
Location: Georgia
Posts: 614
Quote:
Originally Posted by crawdad
I'm tearing out everything except for the mufflers
I meant to say I'm tearing everything out except for the "headers"
__________________

2012 Silverado LT 1500, 5.3, 6 speed auto
'86 SWB C-10 Silverado
crawdad is offline   Reply With Quote
Old 05-25-2005, 12:25 AM   #21
corn
Registered User
 
Join Date: Dec 2003
Location: here
Posts: 5,789
An "H" pipe will quiet it a BUNCH & run tail pipes all the way out the back. The longer the pipes are the quieter it will be. From past systems Ive used, Ive noticed that installing the mufflers clear in the back will make it a lot quieter in the cab too. Good luck with it...corn
corn is offline   Reply With Quote
Old 05-25-2005, 01:18 AM   #22
Blue_71
Bloo
 
Blue_71's Avatar
 
Join Date: Feb 2001
Location: Barren County Kentucky
Posts: 6,283
ive got hedman headers, 2 1/4" pipe, and summit turbo mufflers and pipe exiting at a 45 degree behind each wheel on my 89, its really quiet but sounds pretty good... the summit turbos are only $15 each
__________________
ASE Master Certified-GM Trained-Mechanic
1968 Chevy C30 157" WB Wrecker
1969 Chevy CST/10 SWB
1971 Chevy Custom/10 (first truck) 350, NV3500 5 speed
1971 Chevy K20 Custom Camper 4x4 350 TBI, SM465/NP205
1974 Chevy Custom Deluxe/10
1979 Chevy Custom Deluxe K10 farm truck beater
1989 Chevy K2500

Quote:
Originally Posted by Alan Jackson, Cause I'm a country boy
35s whinin on the asphalt, grabbin mud, throwin up some red dirt
R.I.P. Michael Stilts... I will always love and miss you brother! (9-12-80, murdered 4-9-05)
Blue_71 is offline   Reply With Quote
Old 05-25-2005, 01:45 AM   #23
blaserman
Senior Member
 
blaserman's Avatar
 
Join Date: Nov 2004
Location: glen burnie md
Posts: 447
I have mine coming out the back of the truck and most people cannot really hear them. I would not keep them in the front due to the fumes. Just my thoughts.

Art
__________________
This is my best friend
blaserman is offline   Reply With Quote
Old 05-25-2005, 02:51 PM   #24
Mike76251
Senior Member
 
Join Date: Mar 2003
Posts: 2,499
I HATE loud trucks!! or cars
The real goal I had years ago was a set of headers and mufflers that had around 2 psi back pressure with no noise.
People putting on a set of loud mufflers just says to me "they must REALLY want attention" 'cause they didn't get it as a child.
There is NO valid reason (to me) why one would make there vehicle loud.......they claim to want more power doing that but you can do that without the noise.

I did it with a set of Hooker headers and two Dynomax Hemi Super Turbos (part 289-17789 from Jegs) and I have no noise and very little back pressure.

The easy way is open headers but the legal and hard way is little back pressure and headers.

Wanna argue?
State the back pressure of your system and the decibal level

Last edited by Mike76251; 05-25-2005 at 02:52 PM.
Mike76251 is offline   Reply With Quote
Old 05-25-2005, 04:03 PM   #25
bodydropped
Registered User
 
Join Date: Jan 2005
Location: beaumont,tx
Posts: 757
i got to the race track and most of the street cars there run flowmaster 40 series which they make a muscle car sound mean
bodydropped is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:46 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com