Consoles - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ClassicTruckConsoles · 08-12-2005, 11:54 AM

Check out my site: http://www.classictruckconsoles.com/
Would like to see a console installed in 73-87 model year. Any questions I look forward to hearing from you.

bigarmzz · 08-12-2005, 12:09 PM

so you are gonna start making these for the 73-87's?

i put in bucket seats in my 87, and am open to ideas at this point

ClassicTruckConsoles · 08-12-2005, 12:20 PM

not necessarly, Consoles will fit just about any vehicle that has a transmission hump. Measurements are on the site they just need to be cut to fit. 59 Impala, 85 el camino and 01 suburban have installed consoles. I did the console for my truck and decided since I had a mold made why not offer them for the enthusist. I only had my truck to go by as to what it would fit than I met someone with a 62 and measurements worked same with the el camino. Just need to use your immagination

79BIG10 · 08-12-2005, 01:35 PM

If you're willing to donate one I'll be more than happy to install it in mine with a floor shifter I'd buy.

ClassicTruckConsoles · 08-12-2005, 02:29 PM

I am already a resigter member. Check with Josh or Liz. When can I expect your order?

bigarmzz · 08-12-2005, 02:57 PM

i just clicked on your avatar there...

the console looks nice....what material is that made of???

ClassicTruckConsoles · 08-14-2005, 11:15 AM

Made of Fiberglass by a Boat mfg.

08-12-2005, 11:54 AM	#1
ClassicTruckConsoles Registered User Join Date: May 2002 Location: tavernier, fl. usa Posts: 29	Consoles Check out my site: http://www.classictruckconsoles.com/ Would like to see a console installed in 73-87 model year. Any questions I look forward to hearing from you.

08-12-2005, 12:09 PM	#2
bigarmzz Registered User Join Date: Sep 2004 Location: Elkins, West Virginia Posts: 2,542	so you are gonna start making these for the 73-87's? i put in bucket seats in my 87, and am open to ideas at this point __________________ 1987 350 TBI lowered 5/7

08-12-2005, 01:35 PM	#4
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,774	If you're willing to donate one I'll be more than happy to install it in mine with a floor shifter I'd buy. __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

08-12-2005, 02:29 PM	#5
ClassicTruckConsoles Registered User Join Date: May 2002 Location: tavernier, fl. usa Posts: 29	consoles I am already a resigter member. Check with Josh or Liz. When can I expect your order?

08-12-2005, 02:57 PM	#6
bigarmzz Registered User Join Date: Sep 2004 Location: Elkins, West Virginia Posts: 2,542	i just clicked on your avatar there... the console looks nice....what material is that made of??? __________________ 1987 350 TBI lowered 5/7

08-12-2005, 12:20 PM	#3
ClassicTruckConsoles Registered User Join Date: May 2002 Location: tavernier, fl. usa Posts: 29	not necessarly, Consoles will fit just about any vehicle that has a transmission hump. Measurements are on the site they just need to be cut to fit. 59 Impala, 85 el camino and 01 suburban have installed consoles. I did the console for my truck and decided since I had a mold made why not offer them for the enthusist. I only had my truck to go by as to what it would fit than I met someone with a 62 and measurements worked same with the el camino. Just need to use your immagination

08-14-2005, 11:15 AM	#7
ClassicTruckConsoles Registered User Join Date: May 2002 Location: tavernier, fl. usa Posts: 29	Made of Fiberglass by a Boat mfg.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.