Parting 1977 Suburban - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kennyw · 07-20-2005, 06:42 PM

Excellent front seat, recovered in blue cloth, no sliders SOLD

Fair-Good front bucket seats with arm rests (from '87 Suburban), grey cloth, with sliders, no tears in pass side, drivers side with some tears $150 pair

Excellent blue dashpad, no cracks $75

Rust free front clip (inner/outer fenders, hood hinges, and 454 core support), no dents in fenders, minor dent in core support (looks like fender was replaced from the damage), minor surface rust under battery tray, blue and white two tone $250

Front doors, drivers side straight, pass side minor dent, rust free, complete with blue door panels and towing mirrors SOLD

Back doors, straight, rust free, complete with blue door panels SOLD

Tailgate, power motor with a bad switch, rust free and straight $100

Will post pics later tonight.

kennyw · 07-21-2005, 10:08 AM

ttt with pics

GARMCo · 08-16-2005, 01:57 PM

Hi--I need the air cond./heater blower motor fan wheel -- this is the "hamster wheel" style circular fan wheel that attaches to the blower motor and moves the air through the heater and air conditioning ducts. I think any 73-78 Chevy truck will interchange. Thanks-- Tommy

kennyw · 08-16-2005, 03:10 PM

Quote:

Originally Posted by GARMCo

Hi--I need the air cond./heater blower motor fan wheel -- this is the "hamster wheel" style circular fan wheel that attaches to the blower motor and moves the air through the heater and air conditioning ducts. I think any 73-78 Chevy truck will interchange. Thanks-- Tommy

$5 plus shipping you can have the whole motor and squirel cage fan. Only problem is I will not be able to pull it for a couple weeks as I am heading out of town as soon as I get my truck back together.

GARMCo · 08-16-2005, 11:18 PM

Hi -- thakns very much for your offer but I found one I can get right away -- the heat here is unbearable and I needed it asap -- best regards-- Tommy

patgizz · 08-16-2005, 11:23 PM

what state are you in i need doors if you're within driving distance.

kennyw · 08-17-2005, 11:43 AM

Quote:

Originally Posted by patgizz

what state are you in i need doors if you're within driving distance.

I am in WA state. I will be passing thru IL next week sometime too, but I found a crewcab in need of some blue doors and will probably keep them now.

GARMCo · 08-17-2005, 11:51 AM

Hi -- me again. You mentioned 2 weeks delay and last night I said I couldn't wait -- well the other wheel I located had a crack, so looks like I'll need yours and am willing to wait 2 weeks for it. Please advise my total cost and I can paypal you the $ asap -- thanks & regards-- Tommy

**ScottH** · 08-17-2005, 12:14 PM

Would you have a good fan shroud from the 454?
Thanks.

kennyw · 08-17-2005, 01:41 PM

GARMCo, I'll let you know when I get back and I will pull the fan before I take any money to be sure it is in good shape. I can ship it within a day if you are paying with paypal then.

ScottH, yes I have a good one but plan to keep it. Good news is you can buy them new for $17 or so from Chevy Duty right now. They work great with the 6.2L diesel swapped into my '79

**ScottH** · 08-17-2005, 02:05 PM

Thanks for the tip!

07-20-2005, 06:42 PM	#1
kennyw N9PHW Join Date: Jan 2003 Location: PNW USA Posts: 136	Parting 1977 Suburban Excellent front seat, recovered in blue cloth, no sliders SOLD Fair-Good front bucket seats with arm rests (from '87 Suburban), grey cloth, with sliders, no tears in pass side, drivers side with some tears $150 pair Excellent blue dashpad, no cracks $75 Rust free front clip (inner/outer fenders, hood hinges, and 454 core support), no dents in fenders, minor dent in core support (looks like fender was replaced from the damage), minor surface rust under battery tray, blue and white two tone $250 Front doors, drivers side straight, pass side minor dent, rust free, complete with blue door panels and towing mirrors SOLD Back doors, straight, rust free, complete with blue door panels SOLD Tailgate, power motor with a bad switch, rust free and straight $100 Will post pics later tonight. Attached Images __________________ "I got it one piece at a time and it didn't cost me a dime..." Last edited by kennyw; 08-17-2005 at 01:43 PM.

07-21-2005, 10:08 AM	#2
kennyw N9PHW Join Date: Jan 2003 Location: PNW USA Posts: 136	ttt with pics Attached Images __________________ "I got it one piece at a time and it didn't cost me a dime..."

08-16-2005, 01:57 PM	#3
GARMCo Registered User Join Date: May 2004 Location: Georgia Posts: 43	Air COnd. part Hi--I need the air cond./heater blower motor fan wheel -- this is the "hamster wheel" style circular fan wheel that attaches to the blower motor and moves the air through the heater and air conditioning ducts. I think any 73-78 Chevy truck will interchange. Thanks-- Tommy __________________ 1973 K5

08-16-2005, 11:18 PM	#5
GARMCo Registered User Join Date: May 2004 Location: Georgia Posts: 43	hamster wheel Hi -- thakns very much for your offer but I found one I can get right away -- the heat here is unbearable and I needed it asap -- best regards-- Tommy __________________ 1973 K5

08-17-2005, 11:51 AM	#8
GARMCo Registered User Join Date: May 2004 Location: Georgia Posts: 43	Air. cond. hamster wheel part Hi -- me again. You mentioned 2 weeks delay and last night I said I couldn't wait -- well the other wheel I located had a crack, so looks like I'll need yours and am willing to wait 2 weeks for it. Please advise my total cost and I can paypal you the $ asap -- thanks & regards-- Tommy __________________ 1973 K5

08-16-2005, 11:23 PM	#6
patgizz Registered User Join Date: Oct 2002 Location: Cleveland, OH Posts: 429	what state are you in i need doors if you're within driving distance.

08-17-2005, 12:14 PM	#9
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Would you have a good fan shroud from the 454? Thanks.

08-17-2005, 01:41 PM	#10
kennyw N9PHW Join Date: Jan 2003 Location: PNW USA Posts: 136	GARMCo, I'll let you know when I get back and I will pull the fan before I take any money to be sure it is in good shape. I can ship it within a day if you are paying with paypal then. ScottH, yes I have a good one but plan to keep it. Good news is you can buy them new for $17 or so from Chevy Duty right now. They work great with the 6.2L diesel swapped into my '79 __________________ "I got it one piece at a time and it didn't cost me a dime..."

08-17-2005, 02:05 PM	#11
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Thanks for the tip!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.