|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
10-06-2005, 01:56 PM
|
#1 |
|
Never Done?
 
Join Date: May 2000
Location: Ohio
Posts: 1,435
|
Painting/Installing Control Arm Shafts
I'm hoping to get the front end of my truck back together fairly soon, but I'm gonna need to paint the control arm shafts first. Any tips on painting/installing these things? I normally do real good taking things apart, then screw it up when I put it back together, so I thought it best to ask here first before trying.
|
|
|
|
10-06-2005, 02:12 PM
|
#2 |
|
67 is sold
Join Date: Apr 2001
Location: Troy, Michigan
Posts: 6,733
|
I just sanded mine, threw on some primer and some nice gloss paint
|
|
|
|
|
10-06-2005, 02:28 PM
|
#3 |
|
Never Done?
Join Date: May 2000
Location: Ohio
Posts: 1,435
|
So no need to worry about the threads? That's my main concern. Don't want to wind up with paint flakes in the grease fittings. Thanks.
|
|
|
|
|
10-07-2005, 12:46 PM
|
#4 |
|
LAIDOUT
Join Date: Jan 2005
Location: NW Montana
Posts: 928
|
I cleaned the grease off the threads then put masking tape on the threads before sand-blasting and painting. When they were dry I peeled off the tape and installed them, no worries.
|
|
|
|
|
10-07-2005, 04:00 PM
|
#5 |
|
Registered User
Join Date: Apr 2005
Location: Austin, TX
Posts: 1,223
|
I used all new shafts, both upper and lower. Made it easy to paint.
__________________
- Greg |
|
|
|
|
10-07-2005, 04:12 PM
|
#6 | |
|
67 is sold
Join Date: Apr 2001
Location: Troy, Michigan
Posts: 6,733
|
Quote:
|
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
