Quote:
|
Originally Posted by Tx Firefighter
It will cause negative camber mainly. The wheels will lean in at the top. You'll need to add shims behind the upper control arm shafts to bring them back into spec. A 2 inch front drop will be easy to align for any decent front end alignment shop.
|
That's what happened to mine. I just added some shims on each side to set it out to look eye level but still got to get alignment done.
__________________
If it don't fit, force it,...If it still don't fit , modify it 'till it does fit !!!
11-11-2005, 07:46 PM
Hybrid Mode
